Search results

Let me start off by saying I am no FPV expert. I have a standard AVL58 lite transmitter, looking to gain a video signal out to a Black Pearl Diversity monitor. Both 5.8ghz. I Cannot get a video signal at all! Tried all bands (A,B,E,F) and channels (1-8). I even swapped my video transmitter and...

Thank you for the information. I am about 5 secs away from pulling the trigger on a pre-order. I use a standard quad or hex with a gopro/zenmuse and it has performed well enough to get the job done. But the building and tinkering aspect gets old after 10+ builds. The catch is I use my rig ALOT...

Selling a completely "Ready To Fly" professionally built Quadcopter. The kit is brand new and includes everything you need to fly and film beautiful video, or take photos with your own GoPro camera. No searching for parts, they are ALL included. Rig, radio, battery, everything ready to fly...

Hey Ed, I am looking to place my pre-order on an Inspire, and I am curious if there is a confirmation on any specific dealers that the case is included? I have had a few people tell me their pre-order received a free case because of a shipping delay? I am just wondering where can I know 100%...

Selling a completely "turn-key" ready to fly quadcopter kit. This quad was professionally built with all new components for aerial video & photo. The rig will get it's maiden flight with video proof before shipping. Still have the Naza, Motors, Zenmuse, and ESC boxes. If you are looking for a...

The props keep coming off of my Tmotors after maiden flight. Brand new build, I put on extra washers and a lock nut but it doesn't screw all the way down. Props spin loose every time and fall off. Any idea on how to stop this? I have read about lock nuts. But the "lock nuts" I purchased don't go...

Sent! Sorry for the delay

Makes me wonder if I should just make the switch to 6s. But it looks like either way on 6s I'll have to swing a bigger prop. Ideally I'd like to stay around 11" or 12" because that is what most of my setup is built around. I see the 400kv motor recommends alot bigger propellers. The MT2814-10...

Thanks for the valuable information. I guess I should say I'm looking for the most efficiency from those motor choices for my Y6. Definitely will lose a small bit of efficiency with the coaxial setup, but that is okay. I plan to have something capable to still fly the 12+ min range even after...

Great! Really makes sense now. Looks like I may just stay with the 770kv. I currently have Tmotor 35a 600hz ESC's to pair. I think the 770 will carry the payload great. I'm just wondering if the efficiency will provide enough flight time with such a high rpm motor compared to the others. Thank you!!

Thank you for chiming in Bart. I've been scouring for weeks and don't want to make the wrong buy. So you're saying 4s no matter if 10000mah is still underpowered for these motors, do you think 6s would do the trick? In your opinion, would you run the 770kv on 4s or 400kv on 6? I don't see a...

Good question. I am in the same boat. Looking to put the Tmotor MT2814-400kv on a Y6. The spec sheet says compatible with 4s-8s Lipo. I plan to run two 4s in parallel, but I am just wondering if I'll be underpowered or not.

Sick build! Love the custom work. Those SunnySky motors seem to hold the weight very well. I was looking at the spec sheet, a bit more thrust than the Tmotor 770kv I am thinking of purchasing. If I calculate each motor at 50% it appears that I would have more than enough power to hold the weight...

Hmm for some reason every time I upload the image is tiny. Even at 2000x2000 let me see if I can upload on another computer. In the meantime, what motors are you running on your rig? Thanks for chiming in!

Putting together a Y6. I've built a few multi's but this is my first coaxial setup. After countless looking and researching for the correct motors I have made a choice and wanted to see if anyone had any input. I tried to research everything, but figured someone with real world experience may...

SunnySky has good quality motors. I'm not a fan boy, but Tiger Motors have had the best/most reliable products I've used. Also KDE direct makes some amazing motors. As far as ESC's for a hex, I'd stay near 30a or higher on MayTech, Turnigy, Tmotor, or many other great ESC brands. Some will have...

Could be a multitude of things, so don't quote me here... But going off of experience. It sounds like a possible ESC timing issue. Have you calibrated all of your ESC's correctly? This can lead to the motors running at a different time than one another. Maybe something to look at if not...

I shoot AP work and reside in NC as well. I'd say for the market and way things are moving now, you truly can't go wrong with the Zenmuse/GH4 gimbal setup, on a multitude of different rigs. You can come out well below $10k with some change to spare. Stick to popular brands like DJI, Xaircraft...

Hello all, after building a few hexacopters and quad's I purchased my first Y6 to build this week. Currently using an Aimdroix Evo One Y6 with extended arms. I am planning to run my Zenmuse H3-3D and Hero4 for a solid aerial photography and video platform. I live and work on the coast, and many...

Purchased this frame, assembled it, and never put anything else into it. Not enough funds at the moment. This frame is shiny new. Never installed motors, esc's or anything else. Only put the frame together. Amazing high quality work put into this frame Includes: (1) All Black - Aimdroix Evo One...