Search results

CineStar 6 with a history of multiple crashes for sale. Any reasonable offer will be considered - 843-637-0455

Looking for 1 Freefly F360 0866 servo

I have a Cinestar 6 with the DJI A2. Does the A2 assistant still show failsafe when I shut down the Futaba Tx?

I am flying with the Zippy 30c 5s 8000mah battery. As of late I have replaced both esc's and motors on my Cinstar 6. The motors I have now are Sunnysky's-4010/kv450 and the esc's are Range Video 60a. This combination seems to cause the batteries to run hot to the touch and also get puffy. The...

Calibration for TX max & min throttle during build? I purchased a Cinestar 6 with a Wookong flight control system along with six Maytech 45a opto esc's. Unfortunately, the person who built the machine did a very poor job because I have had nothing but problems from the very start. Fortunately...

I currently have APC 14 x 4.7 SF. I have read in the forum that the Slow fly props are not that compatible with the WookongM system - causes quite a bit of the jitters. In the same thread they suggested the Graupner 11x5 prop. According to the spec page for the motors I have the suggested prop...

I have a Cinestar 6 with Wookong M flight control. When I yaw to the right the copter rotates fine but upon completion it seems to float backwards about 10 - 12 feet. Then as it is regaining its position moving forward the LED blinks 3 white blips 3 times. I understand this to be a signal for...

My cinstar 6 with a WookongM Flight controller lurches left on lift off then moves left on its own. I am forced to roll right to stabilize the movement of the copter. Any thoughts? Thanks, Dixon

Recently purchased a Cinestar 6 and the DJI Wookongm flight controller. I have been practicing on the phantom 1 to somewhat prepare myself for the Cinstar. In start-up, the phantom gives me series red LED blips which gradually ends meaning I have a 6 or 7 gps satellites locked into my phantom...

Does anyone have any experience with the Canon 5D Markii for aerial stills? Thanks, Dixon

Just getting started in the aerial business. I am a architectural photographer working in Charleston, SC and think this will be a great resource for income. Over the last several months I have been practicing on a Phantom 1 to get acquainted with the motions and movements of the transmitter and...