Search results

Make us a offer.

Without words.

New settings to get less cogging, The results,

And the footage from the GH2.

First test drive.

I have unwound the pole and rewound the wire back with some room for a new connection, it all worked out and the motor is running flawless now :) Total A use complete mount including the Immersion 600mW video tx, all three motors are set to 220 power on 20V, temp on the motor poles +/- 55°...

Sometimes **** happens :( :( GBM8017 Pan motor,

Some photo updates,

Because we want to run the mount on 20V (max Alexmos) frome the flight lipo we ordered a slipring and a step-down regulator. Slipring is the Moflon MMC2509 - Suffix-FL03 MMC250 Slip Rings - Moflon Slipring Step-Down converter. EUR ? 7.35 - DC naar DC 4.5-30V naar 0.8-30V 5A Ajustable Step...

Some update pictures of the built up,

Send you a PM.

To give you guys an idea of the size of this mount a photo with a completely balanced (all axels) GH2 with 14-140 lens.

Hi SMP, There are so many aftermarket options and wishes for a camera quick release so we didn't jump in to that, but the mounting plate is big enough to fit them all we hope, if not there will always be a custom solution ;) In the future there will be a optional dual bearing solution with a...

Hi smaris, We have no intension to make a handheld version of it, this mount is designed for far more difficult conditions when flying in windy situations and speed flying. But a hand-held conversion will be easily done, especially when used with the Quick-Lock mounting system ;) Send us an...

One for tilt and the other one for roll and pan, this way the roll axel will not go greasy when you tilt down 90°.

This mount is designed especially for big High-End camera's for aerial work that will also work with wind and high speed flying. We have chosen for a rigid design with big 25mm bearings on the pan and roll axels, the mount is very stiff and all the axels are smooth without any play :)...

V2 wire-damper brackets, more than 50% weight reduction.

All fitting perfectly :) Pan-bearing with 25mm shaft,