Search results

  1. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    yes they are very retarded ,,,,,,,,,,,, yesterday I made a test , I tried the datalink without the RC and it worked fine , I flied for about 20 min and I had no problems ,,,the idea of the datalink is very smart and also funny to use ,,,
  2. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    Ok i will let you know ..... Thanks again
  3. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    I will search if i can buy this thing Here in germany i will let you know,,, Nice photos
  4. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    http://wwwusw mersionrc.com/product-details.php?fpv_product=8&fpv_product_name=EzUHF%20Long-Range%20RC%20RX%20-%208%20CH%20Diversity How can i use with the naza v2 '''does it workd?
  5. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    where can i buy that ? The rx is a diplex receiver with 8 channels, both of which are 433 mHz which is selectable in the software... not sure if you know whom "Trappy" is, but he uses the same setup on his long range flights... I am using the PRO version of which is tweaked a little and has...
  6. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    the other datalink with 900 is not for the naza 2 , but for the other sistem , I forgot the name
  7. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    thanks again for all the good tips , I will search around and I will see what I can do , ,,,,
  8. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    can you tell me more about this EZ UHF
  9. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    I can change the mode in the futaba but it is the same ,,,,
  10. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    bu how ? in the datalink I canno change the frequeny , and how can I just the frequency on the futaba ?
  11. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    So people before you buy a DJI DATALINK 2.4 make sure it works with your RC
  12. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    so I am coming from a test ... bad news ,,,, the futaba works perfect , but it has the same problem I had with my Graupner mx 16 , the Futaba has problem with the DJI DATALINK 2.4 , after not ever 250 m the futaba says that the signal strength is low ..... the same problem I had on the MX 16...
  13. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    well I did not want to write nothing bad about this person , but I think forums are made to help people when have a problem or do not understand something ,,,,,,
  14. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    in about 2 or 3 hours I will do my first test outside with the new futaba ,,,,,I am recharging the lipos
  15. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    I use for the video an immersion 5.8 ghz 600mw, I tested till 1,5 km and the video was fine , I could go more far away but I was scare, I could not see my f450 anymore ,
  16. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    I forgot ... the Futaba came with vTx (RX7008SB) how much power are you transmitting?..... 100
  17. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    Hi and thanks again for all your tips ..... I can see how far away I fly from the ios DJI , I also have a FPV .... 1 km with the Futaba 14SG seems to be short , with my old Graupner mx 16 Hott I could go over 1,5 km and I had more than 50%strong signal ... I had to change the Graupner because...
  18. T

    Futaba 14 SG + F450 NAZA V2 ...grrrrrrrr!

    sorry my language is not english so any words I do not know how can I know when the signal of the w------- is less or is loosing it ... in my graupner mx 16 I had 2 numbers more far away was the f450 less got this number ..... with the f450 at about 900 m I had 65% strong signal ...
Top