Search results

  1. henrysj

    Dual use rudder stick? Copter/Gimbal control

    Has anyone come up with a way or tried to use the rudder stick for controlling both the copter and the gimbal with a switch to be able to change between the two? I've just received a gremsy h3 for a new sub 7kg rig and keen to have the option of using it as a single op rig but never find...
  2. henrysj

    What's better... smaller & more or larger but fewer lipos?

    Trying to work out the best way to go... either 8500 or 10000 mah with 4 in parallel or 16000 or 22000 mah with 2 in parallel Ive done an ecalc on each using Tattu 10000, 16000 & 22000mah as well as the Vulcan 8500mah superlight. I'm not totally convinced what ecalc is telling me - I'm not...
  3. henrysj

    The Dominator iCharger 4010 Charge Station 3000W

    The Dominator iCharger 4010 Duo Charging Station *** 3000W @ 48.8V *** Unleash the full potential of the world's most powerful heavyweight charger with this custom built Charge Station. With 3000 Watt @ 48V on tap the Dominator not only allows the iCharger to reach its maximum output...
  4. henrysj

    Manual Waypoint Control

    Has anyone come across a way to control the speed manually from the transmitter while using waypoints? I'm using DJI PC based Ground Station at the moment and I'm pretty sure it's not possible but thought there might be other software or flight controller out there with which you can? Cheers
  5. henrysj

    Sub 7kg with Movi M5

    So is it possible - has anyone tried and succeeded? The sum of the parts and it looks just doable on a hexa frame with 6s 6000mah batteries but its really touch and go and in reality will probably just creep over 7kg by a few grams so might have to strip it back some more. My initial thoughts...
  6. henrysj

    Naza Lite - faulty or just not very good?

    So I've got 3 Naza M V2 in various crafts and they all work brilliantly - I then bought a Naza-lite (no gps) to go into a F450 I was putting together with a load of spare parts to chuck around and what a difference it is to the M. There seems to be no consistency to what angle it pitches at...
  7. henrysj

    Rotoreyes gimbal

    Is anyone using or got info on the Rotoreyes gimbal supplied by dronetuner? Cant find any info at all on a search on here or other forums which seems strange as it looks like a pretty good alternative to the AV200 with direct drive
  8. henrysj

    Disco Pro taken down in flames by Jeti esc!

    Been trying to sort out why when yawing the disco I've been getting a huge wobble - it's alright on small rudder inputs but put the stick all the way across and it only just remains in flight before recovering itself into a nice flat pirouette. About 3 minutes into a flight this afternoon one...
  9. henrysj

    DX18 just died....

    Went to go for a flight, switched it on and then - nothing. Orange bars light up dimly, no screen and then I get this winding down noise followed by the orange bars blinking 3 times. Now just as writing this and having it on next to me for a minute the thing sort of came alive - screen lit up...
  10. henrysj

    A2 gear out of sync

    So for some reason my A2 thinks the gear is down when the gear is up and vice-a-versa. I've tried reversing channels on transmitter and in A2 Assist but nothing corrects the problem. I'm pretty sure when I first connected it to test the retracts all was fine but something has happened since...
  11. henrysj

    A2 Herkules Coaxial Wiring

    I've got a Skyjib X4 ready for it maiden flight but I just have one question about the wiring between the A2 and the Mircomatch connectors for the Herk board. I've setup the Skyjib motors as per the recommended way in the Herk manual: A = M02 B = M03 C = M04 D = M01 E = M08 F = M07 G = M06 H =...
  12. henrysj

    UK or EU 6s Lipo 8000mah Supplier

    Having a nightmare trying to source 8000mah 6s lipos without getting them from the states and therefore having to deal with customs etc. Anyone have any tips? Cheers
  13. henrysj

    Gremsy gStabi Gimbal H14

    Does any one have any experience with this gimbal? Seem's to be one of only a few brushless gimbals that can handle up to a red epic (6.3kg payload) and is $10k cheaper than a Freefly MoVi gimbal. There was a big group buy for them on the redusers forum and a few are being used on multirotors...
  14. henrysj

    Herkules V3 with BEC

    Hi guys, I've been an avid lurker on here for a few months now - and first off would like to thank you all for the time and effort you put into this forum, the information available is staggering and I wouldn't have got nearly as far without you all. I'm in the process of of Skyjib X4 with...
Top