Search results

When flying with my 360 rig below the copter the legs has to be removed. Flying like this requires some creativity regarding landing.... On this flight I had to try a few times.

I have used my hexacopter mainly for aerial photo during the last 2 years. But now I`m playing with 360 video shot with 6-7 Gopro cameras mounted under my Tarot Hexacopter. Not very easy - but very challenging. The most difficult is stabilization when flying with a huge "tripod" under the hexa...

I have several hundred flight with my Tarot T960 hexacopter using TMotors and a Naza-M V2 controller. Total weight is 6.5 kg. This combination works perfect. But when using a DJI A2 flight controller on this bird it becomes very unstable. It is wiggling (dancing in the air) from side to side. I...

I am using a Tarot T960 with Tmotors 4014-9 400 and a NAZA-M V2 flight controller. Until recently this setup was rock solid and a dream to fly. But after 20-30 flights with my new motors I experienced some problems which I think is caused by timing issues (motors - esc). See this post...

I have experienced problems using DYS 40A ESCs with Simon K Firmware with Tmotor 4014-9 400 . The reason is probably sync-/timing issues. Described in this post: http://www.multirotorforums.com/showthread.php?22667-Tiger-Motors-4114-9-400-problems I need some advice on how to fix this. 1. Can...

Tiger Motors 4014-9 400 - problems I installed brand new T-Motors 4014-9 400 on my hexacopter a month ago. They are used with 17 inch props and a NAZA-M V2 fc. I have had 30-40 flight with those motors with no problems at all. But on my last 2 flights I have experienced some problems. Just...

Take a look at the group "Aerial HQ Worldwide" on Flicker to view great images shot from above the ground - using multicopters, rc planes and kites. https://www.flickr.com/groups/aerialhqworldwide This is shot with a Panasonic GH3 and a Samyang 7.5 mm fisheye lens from a multicopter 120...

One of my favorite places for multicopter shooting....with my GH3 hardmounted on the hexacopter. I would like to add a small tilt head/servo to this. Have anyone experience using this: http://www.robotshop.com/en/lynxmotion-micro-pan-and-tilt-kit-with-servos-black.html Show more images here

I have just unboxed my new DJI Lightbridge. Everything is connected and working....no its not....but I dont know how to connect my gimbal pictch. On my ordinary setup I am using a Futaba T8J (8 ch). Channel 8 is used to control the gimbal pitch (not a DJI gimbal). But how can I do this when...

I currently run a DJI Naza-M V2 on my hexa (i also have a SuperX available) for aerial photography/video. I have also installed a GPS tracker which I can call in order to receive a SMS with position. I would like to display the copters position on a map in realtime on a iPhone, iPad or a...

I have a Naza-m V2 mounted on a Tarot T960 hexacopter. I have been using another FC until now, but when mounting the Naza-m V2 I have problems. When doing CSC in order to arm/start motors nothing is happening. But if I move the throttle to 55% (after CSC) the motors start spinning with a lot of...

This is a video from Seljord in Norway, flying over a small river close to the mountain. I have used a Sony Nex-5 and X-Cam X140bs gimbal.

This is my second and third video recorded with a Sony Nex-5N and a brand new X-Cam X140BS gimbal. With training and some adjustments I think this will fun doing. This is a Tarot T960 hexacopter. Early in the morning with a lot of fog In the afternoon above a lake

I have a Tarot T960 hexa - and a GH3 which needs a gimbal. I have already bought a gimbal from Foxtech, but its not possible to make this work. Now i want to concider to buy a new, but its not that easy to decide what to buy. I already have a alexmos 32-bit controller board. Any suggestions on...

3 way cam switcher not working with Devo7 I have a Foxtech 3 way cam switcher in order to switch between two different cameras during flight. When i connect this to my Futaba receiver, it works fine. But because of a lack of channels I plan to use a spare Devo7 tx/rx in order to operate this...

I have a brand new Naza-M v2 installed on a brand new hexacopter. My problem is that it will not arm and start the motors. This is the case: When running the Assistant software all setting is ok. All sticks are going the right way. I can test all motors, and they are spinning the correct way...

I have a problem with my DJI Naza-M V2. A few days ago I had this flyaway-situation where my hexacopter crashed into a tree. This had never happend before. No damage to the copter, except a few broken props. After fixing this problem I had no problems flying. Yesterday I did not manage to...