Search results

Yes I have balanced the camera on the tray. My tilt position gain is 180 and if I go any higher, tilt starts to jitter. At 180 position gain tilt stabilization is not very good yet. If I undserstood correctly, when increased, velocity gain should reduce the tendency to jittering. Is this...

Gains question: I have the AV130 and Sony CX-730. At the moment I have default gains. The roll is not efficient enough. When I roll to the right for example, the camera also rolls to the right a little. Tilt is worse. When tilting, the camera starts to rock itself violently up and down. Is this...

I would like to have the coaxial system like in this thread because I fly Wookong. Do you have the necessary parts for that in your web shop in the future? Is Cinestar-6 the frame the mod is based on? Thanks.

Ryan: On the latest Kopterworx Vimeo video this statement was given by Kopterworx: "KW9 are not heavy lift, KW8 and KW10 are heavy lift and extreme lift" Also it is stated in the comments by Kopterworx that the video´s setup should be able to lift RED easily. So I think KW8 should be enough...

I have to start the thread with some questions regarding the setup as I am about to start building it and don't know exactly what do I need. Plan is to build a copter that eventually will be able to lift RED Scarlet My setup is going to be: - Cinestar X8 - Wookong-M (this I already have in a...

Update on my Skyline issue: The one I got seemed to be faulty, so Photohigher agreed me to ship it back to them and they shipped me a new one. It arrived from New Zealand to Finland in four days so that was pretty fast indeed. I will pick it up tomorrow. I also had some problems with my AV130...

Hi BoB That´s some nice footage and atmosphere there. Congrats! What camera settings did you use in the Sony CX-730? Tuukka

Yes. I hope Photohigher at least answered my mails. But no. At least not yet. Will let know how this ends up...

Hi Nic That´s OK. What is the photo guy´s name? When I plug tilt into the channel I control roll with, nothing happens. No response to the stick input in that case either. This is also demonstrated on the video I linked. If by swapping you mean I could get a replacement Skyline, no success at...

Hi Nic It´s Tuukka with a double k by the way :) Yes I have the original harness as well. After the replacement harness I received from 1001copters along with the dummy pots did not work, I modified the original harness according to the instructions on Photohigher´s web pages. Also that did not...

Hi Does anyone have a pinout for a properly working Skyline wiring harness? I still have the tilt problem despite everything should be correct hardware and software wise. Correctness has been confirmed with a video I made and sent to Cedric at 1001copters and also to Photohigher. After seeing...

Does anyone have any hint on the tilt not working problem I wrote on post #2130? Still has not been solved and the wire works OK. I measured the wiring loom and it is faultless. I noticed that there is a RSGS V2 available at Kopterworx. Is it somehow better? Does anybody know? I purchased the...

I am having the same problem with Brian Courtice in last Nov. The tilt control via the transmitter does not work on my Photohigher RSGS. The stabilator and gimbal is connected to a separate receiver from the copter itself and is powered by a HobbyKing 15A UBEC. The stabilization works OK on...

Hi I am planning to upgrade my AV130 with the pan system. Some questions: 1. I suppose the legs of the pan system turn with the camera? Otherwise the 360 pan would be useless. 2. Does the pan work well with the Skyline RSGS? My airframe is Droidworx AD6 HLE V.2 Thanks, Tuukka

Dave; Sorry, wanted to understand more: So you power your Skyline RSGS with the copter´s receiver and then you power separately the servos via a BEC? With the servos do you use an Y-cable and just cut off the signal wires from the Y-cable? So only the +6v and ground go to the servos? With this...

Hi Here are my harnesses. The one on the on the right has one extra wire, tilt pot. Which one is the new one to use with the dummy pots? I foolishly placed them next to each other...

Thanks Cédric! Can you also link the wiring harness modifying guide if you have it? I am not sure anymore which harness is the right one :shame:

Thanks Ross. What about the dummy pots? According to the user guide, they are not used anymore. Is this the case?

I was wondering the same. And in the user guide (or setup guide which it is also called) there is no mention of dummy pots anymore. I was planning to use this weekend for setting up the thing but now I guess I have to wait until things clear out :upset:

Hi Just starting to put this thing together. The Photohigher site for this item is quite puzzling... Just what the heck is the confusing amount of downloadable things on the pages. Which ones should I download? There´s "software" and "SW", "Firmware" and "FW", two different setupguides -...