Search results

  1. BorisS

    Austausch zum Aufbau eines DW AD8 HL mit WKM

    lostview, du solltest schon jedes ESC mal ein lernen das es den gleichen trottle range hat wie die anderen. Einfach ESCs direkt an den trottle channel und eine calibreierung durch führen oder hast du die DJI ECS ? Hast du niemanden der dir beim starten helfen kann und dann Vogel mal übern kopf...
  2. BorisS

    Whats the Risk of combining 2.4ghz Futaba and 2.4ghz VTX

    okay knock it. I am going out to the country side anyways i will just try it. Hope nothing happens i will report back Thanks Boris
  3. BorisS

    Whats the Risk of combining 2.4ghz Futaba and 2.4ghz VTX

    Hi Fritz, on one bird I am using TBS core with current sensor. Very simple OSD with only voltage current used mAh time and RSSI. And on the other long range setup I am using ImmersionRC EZosd think it's called with gps alt baro etc. To tell the truth thought the tbs core is totally enough...
  4. BorisS

    Whats the Risk of combining 2.4ghz Futaba and 2.4ghz VTX

    In the worst case i will just try it out. Was close to today already but than thought I shouldn't risk it etc.
  5. BorisS

    Whats the Risk of combining 2.4ghz Futaba and 2.4ghz VTX

    Without thinking i started putting some 2.4Ghz VTX OSD stuff on my CX4. Thinking great already have a finished 2.4ghz groundstation etc. Now in several FPV blogs forums that combo is pointed out to cause issue. I would like to try it anyways since i am quite safe with WKM failsafe. Just if...
  6. BorisS

    CX WKM Build

    Impressed by the performance of WKM with KW4 and 13 6.5 props. Wind medium to high and i think the results are acceptable no post or gimbal stabilization. Boris
  7. BorisS

    LiPo Question: One cell doesn't fully charge

    hmm i dont understand the 86% calculated from 0 - 4.2V, specific to one cell ? that would mean one of your cells only reached 3.6 V. If this is the case i wouldn't fly with it ! Boris
  8. BorisS

    Thunder Power dead cell

    hmm don't know what the arrangement is between qudroopter.us and TP. Normally the reseller will take care and if they are cool they will send you one before the broken one reaches them :) Boris
  9. BorisS

    Thunder Power dead cell

    so the way i understand it 6.6 x 25c gives you 165 A continous Boris
  10. BorisS

    Thunder Power dead cell

    <tbody> <tbody> <tbody> So what does the C rating on a lipo mean? For starters, the C in C Rating stands for capacity. To break it down to its simplest terms, the C rating is the maximum safe continuous discharge rate of a pack. If you see 10C on your battery, it means it can be discharged at...
  11. BorisS

    Half price S800...

    There is a little more to the s800 frame than some plastic arms 2 center plates and a carbon landing gear. This to be clone before taken serious as a cheaper version has to show which features it includes and what components come with it. I am pretty sure that the motors on the s800 are rctiger...
  12. BorisS

    Did Droidworx banned Plettenberg?

    Mihnea you have several choices either the standard Hobbywing 60A plus ESC or Turnigy Plush etc. probably all the same anyways. But the question is if you want to use those kind of ESCs on a expensive setup. Andreas will probably announce the new Herkules 4 in two months or you can go with...
  13. BorisS

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    hmm you are aware that the gimbal will also have its own case. So S800 in that small case the custom case for the z15 gimbal and one extra for lipo tc etc will do the job. About pulling back the case for none preorder customers would surprise me, if one of the things that makes the S800 a very...
  14. BorisS

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    Well you have the zenmuse with Weight 880g (Without UBEC, HDMI-AV module) Than A nex5 for example with a pancake lens: Weight (Approx.) : Approx. 8.1 oz (229g) (excl battery & media) Approx. 10.1 oz (287g) (w/battery & media) Zippy 6s 8000 may Weight: 1220g (including wire, plug & case)...
  15. BorisS

    Did Droidworx banned Plettenberg?

    Hi Mihnea, just read the last couple pages from this thread might give you an idea. http://www.multirotorforums.com/showthread.php?746-Pletternberg-motors&highlight=plettenberg Boris
  16. BorisS

    DJI Zenmuse gimbal and S800 Spreading Wings preorder

    so hot that you couldn't touch it without pain ?
  17. BorisS

    The worlds first aerial photography?

    very nice ! probably more reliable to get the cams back with those carrier pigeons than with our multi rotors :) Boris
  18. BorisS

    Austausch zum Aufbau eines DW AD8 HL mit WKM

    hmmm das musst du den Paul fragen aber mit dem Multimeter dran und testen. Ohne Bestückung am Board gibt's nur zwei Möglichkeiten entweder fliest Strom oder nicht. Lg Boris
  19. BorisS

    Austausch zum Aufbau eines DW AD8 HL mit WKM

    4s passt dafür findest du LEDS die du direkt dran Löten kannst an die Distribution. Ich lasse meine LEDs auch direkt von 4s speisen ohne Probleme. Werden ein bisschen heiss aber mit dem Flugwind passt es wieder. Die PMU von WKM kannst du auch direkt an das Distribution board löten. LEDS direkt...
  20. BorisS

    Austausch zum Aufbau eines DW AD8 HL mit WKM

    was hast du den vor zu fliegen 4s 5s 6s ?
Top