Search results

Hmm Giovanni I would`t go by the statement only occasionally and does not effect the actual operation ! You wouldn't drive you car if the one of the brakes don't work when you start it, but once you get the brake running which happens occasionally than its safe to drive off. I would do the...

Darkovujasinovis, your explanation is very pausible. The best way to mount your gimbal is to have it a fixed and solidly attach to your copter as possible at the same time though have enough isolation that you dont get any vibrations. Thats the whole game ! If you show some picture of how you...

Thats the problem and i think here the misunderstanding happens. I interpret the instructions as five faces of the cube excluding the base which would be 6 faces. Dont really know which one is write feeling wise it tells me that only five faces excluding the base/bottom. As reason since over 90...

If you didn't calibrate them ESC and 5 of the 6 are working calibration should not be the issue ! Simonk ESCs are defaulted to 1060us to 1860us. Given that WKM outputs the same on all ports. If you did calibrate them than that could also be the source that something went wrong ! I would also...

video, the one from amazon is working fine without any additional power source ! http://www.amazon.de/dp/B00BUQOQCG/ref=pe_217221_31005211_M3T1_dp_1 https://vimeo.com/66802939 Boris

The better balanced the gimbal the less motor power you will need and will only have to deal with external interference, friction on the axis, wind acting on the gimbal when in motion so on ! So 4008/150 when well balance should do it ! The thing i dont agree with is that in my tests it was...

Motors are connected and the gimbal is fully operational. The only thing i do for the calibration procedure is turn the power to 0 for the roll and pitch motor. Than move the gimbal/IMU in the positions shown in the pics below as level as possible and hit calibration. Remeber the first...

SMP I dont agree with the procedure from above ! I seen that on rcgroups: wait is will write something together ! Boris

Xero the parts will be available on Shapeways, without any extra fee or anything. I will have my first copy hope by friday or beginning next week and lets see how things turn out: Finally version: Next version for the black magic pocket:

Hi Ryan, nah there is no throttle calibration needed for the Herkules it comes with a fixed range. No beeping for the number of cells connected. The LEDs on the Herkules indicate something but to be honest i cant remember when blue or orange or whatever ! There is as far as I understand no...

jcmonty I got a similar one from amazon today. I will try it out tonite and tell you. If you want to go sure and get one that works with the gh3 try the one from kopterworx. No external power needed ! Boris

actually the coax props would have to go to Droider and Bartman :), first ones in this forum to do them before all us others ! Boris

parts ordered and changed some if the design. Want to try custom formed gel pads in between the contemplates which sandwich in carbon plates to first hold the LIPO than gimbal: Boris

Okay than communication wise tele board to RX to DS16 something is not working out ! I don't have the tele board yet so I am not familiar with it ! One more check you can do though. In the DS16 in the menu under advanced called jetibox, Click that and see if you can find any reference of the...

Hi Beja, first check in the menu of the DS16 if it has a connection to the tele board. In the ds16 menu go to timers/sensors than sensors and logging setup. There you should find the ddifferent telemetry outputs of the board. Select which ones you want to have displayed. if you don't find...

japp and I am getting 3377.58 $ for a gopro gimbal Halo 1000 from their website :) ! And in general i am not down with their design. For a gimbal that can be perfectly balanced there ahs to be the possibility to adjust the roll axis up and down. Adjusting Tilt up and down and forward and back...

They have a video of it flying: (edit) just looked at it again hmmmm stay with my opinion not impressed !

Cable free we will see ! Once you have your cam on it video feed and cam control it will probably be the same story as the mövi ! Ar least at these prices i would have wanted a slipring to keep everything neat and clean like the zenmuse, also resulting in 360 continuous on all axis. The...

jesus: http://photohigher.com/products/halo-gimbals/halo-1000/ 4100 NZD = 2620 EURO ? did i use a wrong conversion tool ? they must be kidding !

I am not quite sure what you mean with this " Mabe is time to change thinking about the change... " but personally i am not impressed ! Nothing a DIY brushless gimbal cant do ! Boris