Search results

I've read the manual and it absolutely is a "care free" mode. You can manually set a baseline direction in flight (by toggling a switch repeatedly) or automatically 30 seconds after power up. You can also set a baseline direction based on the startup orientation, again either manually with a...

I have the R6208SB and it seems to work very well.

Try setting your ESC to Battery type NiMH. See this: http://www.rcgroups.com/forums/showthread.php?t=1520612&page=3

Do you not have an SBUS receiver? The elegance of a single connection, zero-admin failsafe and the ability to use all the options if using an octo make the SBUS option the best choice if you're already using a compatible transmitter.

mikael, I didn't have to do anything at all to set up failsafe with the 8FG. As soon as I switch off the transmitter the controller detects it and goes in to failsafe mode with the associated blue LED. This is a function of the SBUS system. I think all the stuff about re-binding with the...

The latest firmware (release 27th Dec, version 4.26) changes the way the 10% thing works. With this firmware, the motors will NOT cut even if the throttle is less than 10% in any mode during normal flight. The only time it will cut out when the throttle is less than 10% is in the following...

I have just got a T8FG Super and after a bit of fiddling have got it setup just how I want it. On mine I have one three position switch selecting the GPS/Atti/Manual mode and then another which, regardless of that first switch, will put it in to failsafe mode. It also goes in to failsafe when...