Search results

Price drop.. $450 obo

Center of gravity.... z axis

If I can finish the honey do list today I'll update mine tonight. I'm interested in the vibration fix for heavy lifters.:D

This is the power setup for the "caged threat" that progressive rc sells for $950. Subtract the price of the 4010duo and this is what's left. $100 savings. I had to upgrade my power supply to charge the monster packs I got from maxamps. This power supply has been used for 1 month and not not...

Wondering if anyone knows how to drop the output voltage from 51.4v to under 50 on the HP ESP 120 power supply to use with the 4010 icharger? Or will the higher voltage not harm the charger?

Sounds like your hitting the height or distance limits. ?

http://www.multirotorforums.com/showthread.php?t=2056 Post #54 or so describes how to setup the mix..

For the RTH... you have to mix in a two or three position switch to change your mode to trigger FS. When I get home I'll try to find the thread that describes the procedure.

Any updates on the av200 side of this?

The green flashing is telling you your in home/poi. You have to set poi with 5 quick flips of the switch between off/poi. You then see a series of very fast green flashes telling you poi is set. Then back off 5-500m and flip the switch back to poi. Craft will then loiter around that point...

Yes....

I put it on the camera ops Tx rudder channel and adjusted the limits there. He can adjust on the fly and then return to neutral.

Any updates on this?

Exactly!

My SkyJib 8 was extremely unstable this morning. 10-15mph winds fairly steady. Av200, 2 maxamps 6s10900's and a gopro3 just for testing. Flew great with this setup last Saturday. Gains were default at 100 across the board. Still trying to figure it out in my head. At hover with no input...

I just logged on to try and find the same answer. I set up this morning in Florida about a mile from the beach. 10-15mph wind steady. After a compete setup and calibration took the SkyJib 8 up for a test flight. It danced around like someone was shooting at it. Made me very nervous so I...

@EastCoastJib

Hmmm... just out of curiosity, what is the Tx failsafe throttle percentage set to? I've got mine set to 51% although I don't think that matters unless you actually turn off the Tx. Under the f/s tab in assistant.. are you set to alt-go home? what is the setting for height/altitude?

Did it record home position successfully upon powering up? When you start motors the first time you should see 10 or so fast cyan (light blue) flashes. This is of course with no red lights before starting motors for more than 8 seconds.

Also, you will need to recalibrate the compass if you change your flying field..(location), and addition or subtraction of weight/gear (center of gravity) or any changes to the gains for any changes to measurements related to the x,y,z axis of compass or IMU. Dont ask me how I know... :shame: