Search results

  1. O

    New props offering from Xoar

    I said I wanted to try.. but not with this price..
  2. O

    help quick with my wiring for a 900mhz

    Can you try any other camera? The wiring seems OK. If you bought that kit from hobbyking, don't trust the given manual. Just check the review sectipn of the product, some users post the correct wiring diagram. I just setup 5.8 GHz video downlink system, which I had a wrong wired socket. I had...
  3. O

    help quick with my wiring for a 900mhz

    Red - Red Black - Black Yellow - White Green should be audio. In your case, just tape it.
  4. O

    New props offering from Xoar

    I'd like to try the Carbon Fibers, too. I hope the price level are the same with the wood ones.
  5. O

    MK Quad with RC Timer BC 2836-9 motors and different prop experience

    After some tuning with MK-Tool, here is the latest video. I tried to hover it stable: (That alarm is from the cell phone )
  6. O

    MK Quad with RC Timer BC 2836-9 motors and different prop experience

    Ok here are the other details: When using Graupner 11x5" props, the motors run about 55 celcius. It seems, motors need to run at higher RPM with APC 12x3.8" for generating the same thrust with Graupner 11x5". (Because of the smaller pitch) I need to build a bench setup for detailed thrust...
  7. O

    Tau Labs Can I use hitec 9 with op /cc board?

    Yes you can use.
  8. O

    Xoar 12x5 wood props

    Add me to the list Bart. 4 sets. 12X5".
  9. O

    MK Quad with RC Timer BC 2836-9 motors and different prop experience

    Hello everyone, Recently I've asked a question about the reliability of some alternative motors like RC Timer, KDA. http://www.multirotorforums.com/showthread.php?778-Alternative-and-or-cheap-motor-options Thanks to Matt, I've confidence in trying these alternative motors. I purchased 4 RC...
  10. O

    Custom Aliminium Dome Protector

    Custom Aluminium Dome Protector Hello everyone, My simple electronics protector, made by 2mm aluminium. It fits to MK and Droidworx frames easily with a screw. I can say it's quite solid. I need the third brick for better protection. It weights around 100 grams. It was just a test...
  11. O

    Droidworx ADX-4 HLE

    Great dome! :) Thanks for the details.
  12. O

    New Website Rocks!

    http://www.quadrocopter.us :)
  13. O

    Droidworx ADX-4 HLE

    The video is so smooth! Nice build drhswe.
  14. O

    DJI Flight Controller - pricey but impressive

    Rpbert shipped mine today, I'm eagerly waiting for the package! :)
  15. O

    Beyond the Hover! We have a winner!

    Great job, great contest!
  16. O

    Data-Link necessary ? Workarounds.

    As soon as we will be using standart ESCs, the Lipo choice will be related to ESCs, I suppose. We'll be just pluging the three-cabled socket of the ESC without removing the red cable. I also wonder about the wireless data transfer to/from DJI W-M.
  17. O

    DJI Flight Controller - pricey but impressive

    The videos posted here rised up my expectations but I remember I had the same expectations before buying MK electronics. Especially videos from quadrocopter.us showed us that flying these birds is super easy. But, MK electronics is about the software trimming. I don't even mention about hours...
  18. O

    DJI Flight Controller - pricey but impressive

    Here is the setup that I'm going to use for DJI W-M: Custom frame, Y6 setup Motors: RC Timer B3536-11 750 KV Motors Props: APC 13x6.5 Thin Electric Turnigy Plush 40A ESC Zippy FlightMax 5000 mAh batteries I've the same doubt as Boriss about compatible Tx system. I think I'm going to use...
  19. O

    DJI Flight Controller - pricey but impressive

    Yeah, the ordering process was a bit hard for me too. For instance, I ordered without the coupon code which Robert gave me actually :( So I sent an email to Robert to figure it out. Look for the coupon code area carefully for those who are about to order! :)
  20. O

    DJI Flight Controller - pricey but impressive

    Welcome Robert, I ordered one just a few minutes ago, I could'nt wait anymore :)
Top