Search results

Nice idea, makes it compact, is there an option to use an independent tx? Sent from my iPad using Tapatalk HD

Hey Steve, how's things? Are these radians worth the expense? Sent from my iPad using Tapatalk HD

Thanks very much gtranquilla, I will give it a look!! :-) By the way, heres the vid I took of the gimbal prior to adjusting the gains and changing props/lipo etc. It is shaky but still better than flying without. http://www.youtube.com/watch?v=wE_xP9r4rsc

The wiring is correct.

The negative acts a reference point for the signal wire. I set up my Gimbal with no issues, powered straight from the Naza. Ive since got it set up with a 6V 3A UBEC which seems to work fine on the bench but I have as yet not had chance to test it in flight. What Servos are you guys using? Im...

I don't mean to teach you to suck eggs, but did you recalibrate everything after repairing? Not just the GPS but the IMU as well? Sent from my iPhone using Tapatalk

Thanks for that, I never fly manual if honest, Im not that confident in my flying ability lol. I generally fly GPS. However, when it comes to setting up gains etc, I was under the impression that to have a good idea when things are sort of right, you go into manual mode and slowly increase...

Well, that my test flight postponed for 4 weeks, it's been chucking it down all day and I'm back to work tomorrow :-( Sent from my iPhone using Tapatalk

Sorry, I don't understand... WYE? Sent from my iPhone using Tapatalk

Excellent result Frederick, how are the motors wound? Sent from my iPad using Tapatalk HD

Oops! Lol Forgot about the +/- 2m accuracy on the GPS then lol Sent from my iPad using Tapatalk HD

Oh, nice one! Thanks Kloner. I'm all set up for 200hz and away out tomorrow for a flight, weather depending. Will change it after. I'm looking forward to seeing if there's much of a difference switching over to 3S and 10" props. Sent from my iPad using Tapatalk HD

Hey guys, my hexa was up and running and flying with the AeroXcraft landing gear and go pro gimbal. I've just changed from 8" to 10" props and from 4S 5000 mah to 3S 5500mah lipos. My all in weight is 2300g with GP2 and FPV. I'm not sure what to set the gains at. Are there any recommendations...

Hey kloner, I've since found out the servos can run at 200Hz. Sent from my iPad using Tapatalk HD

Well the F450 is a fair bit smaller and hence faster, however, I've yet to try the Hexa on 10" props. Sent from my iPad using Tapatalk HD

Well here's a clip from my newly built F550 hexa with AeroXcraft gimbal. I'm still getting to grips with it as it feels different to the f450 and need to put abit of work into setting up the gimbal. It's not too bad considering the gimbal is being controlled by the Naza...

Here's another flight with 550 and gimbal http://www.youtube.com/watch?v=wE_xP9r4rsc&sns=em

Well I feel a fool. Ive now realised I had the EZOSD incorrectly set, I had it set to ALARM at 14.8V which given thats the 4S on load voltage isnt very good. The quick blast I gave it sunday was about 2 mins in the air and I used about 20-25% of the lipo on 8" props. Tonight I gingerly tested...

Hey kroner, I'm not sure about the frequency of the servos either I've not been able to find any detailed information on them. The gimbal does seem balanced, I will stick a pic of it up. I will give the lipos a full balanced charge and see how they look.

I've read this too, I'm looking to power the servos off a bec and just have the control signals coming from the Naza.