Search results

Sorry for the lack of updates. Had a busy week editing the fishing show. I made some progress and had a miss hap along the way. Plugged the emcotec rc remote switch unit in the wrong way. Which fired it :( So ordered another one just installed it. Im not going to be using the Gruapner Air Modul...

Its got ball links like single rotor heli push rods. I wonder if this would be beneficial for all multi rotors.

Its just the ezuhf antenna i saw. I want to make some sort of antenna tube/guide for my receivers but am a little unsure about the best way to go about it.

How did you attach the antenna guide to the receiver, are you running uhf still or 2.4?

Yea its way bigger than the XM. I used Hurkules V3 which took up alot of room in the center of the frame. I really dont know how you did it :)

I just installed YS-X6 on my Skyjib V2, a which is large and Dam YS is large, Took along time to figure out where to place everything.

that looks impressive, im sure its going to perform amazingly.

Can any one tell me how or link me to a full step by step guide of making my phone into a wireless hotspot and how to link to ys-x6? Cheers in advance. Had a google but i cant find all the steps.

Thats very cool. Maybe I should have bought kw9 instead of kw10s.

with 14s what kinda of motor kv will you be running and what head speed?

Haha yes your are, im glad you brought it up. It seems like even though ive been planning this build for over a year; there are still issues at every step of the way due to lack of understanding how all these systems interact.

Just had a talk to Andreas, he informed me I should be running two switches. For redundancy, Which is the reason there are two sets of cables coming out of the herk not 1 set of thick cables. So il order the second switch.

Hi Pete, The multirotor and gimbal power supplies are independent of each other. So there are no servos running of this circuit.

I dont know what I was thinking asking if I could place the Air Module and therefor the rx after the switch lol. Must have been a bit tired when I was thinking about that. R-Lefebvre: The way it will be wired with the Air Module and rx before the switch, Is effectively similar to running a...

Other than saving me from joining the two herk power cables together, would two switches achieve anything else? Using two just seems like excess money and components? When one switch can do the job.

I think the emcotec is worth a little bit of extra wiring. Saving most of the electronics from getting fried if they hit water is worth it to me. But yes those images really do explain a lot. Becuase Of the imgaes on the website I thought it was alot more complicated than it actually was.

Boards are programmed tomorow Il start hooking up the motors and setting up ys-x6. Does any one know if the emcotec switch unit could possibly create interference with the imu?

what sort of power supply would do that? lipo to some sort of bec?

In the PPM folder I have two other folders ADV18 and ADV16, each has a different firmware. Which one of these do I use. Had a look on the website to check and it mentions nothing. The full names of the files are: HKIIIv3_SW095_PPM_AFW1_kHz16_ADV12_GAS1020_STK1100_900_TMP90.acy...

Well that makes it about 1000x simpler, i was freaking out about which cables to use and all of that. what timing are you using for the kw10 motors? are you using active freewheeling? Do I need to connect a battery to the herk board to program? Any other settings other than motor timing and...