Search results

Here is the email I just received from Tarot. hi i am sorry now i am no sell ------------------ 原始邮件 ------------------ 发件人: "张旦晨";<sales@tarot-rc.com>; 发送时间: 2014年12月19日(星期五) 凌晨5:20 收件人: "张旦晨"<sales@tarot-rc.com>; 主题: Website Inquiry from tarot-rc.com Are replacement parts...

I did email Tarot. No reply so far. I emailed the guy who broke his frame and asked him what they said, his reply was their reply was just the part was not available. I started this thread because of my frustration with DYS and getting a replacement part for a loose roll connection. It's a...

In the case of the Tarot X8 or X6, it's off my wish list till I see parts or buy something else. I understand my anyone would buy a frame or gimbal if replacement parts aren't available or easily made.

It's a f1.4. How low do you want to go? I have one, but haven't flown it. If I get some air time in the next few days, I'll put it on and give it a go to see how stable it is. Can't promise anything, but maybe the weather will break around here one of these days.

MR's crash for lots of reasons. To buy something without parts is kind of dumb. This list is to help people know what Frames and Gimbal don't have available parts for replacement. Many parts can be built, but many cannot. It's beyond the scope of one person to compile a list so I thought the...

Short answer yes if I understand the question, Long answer: Yaw, I have follow on with a little dead band. Flying straight, gimbal stays steady looking ahead. If I yaw copter to the right or maybe fly to the right, the yaw will smoothly follow. I have the 18 or 20 degree max set up, so I...

Are you using 1 or 2 IMU's. I assume you did the autotune? Maybe try just the autotune 1 or 2 times and see what kind of settings you get. Are you in follow mode? If you have your radio connected for yaw, try disconnecting that first till you get it working. I remember when I first...

I'm being redundant here, but I've had good luck with Centerpiece (2 imu) on 2 gimbals flying gh3 & gh4 on a DYI gimbal (5208 motors) and DYS Eagle eye with large motors, 60mm or 62mm. I've talked about the horizon issue many times and am waiting for the 1331 firmware, however, mine is flying...

The base CP is retail $400 and the high voltage with 2 IMU's is $600. They had a black friday sale which was 10 or 15% off and additional off if you bought more. Most of us paid the $400 or $600.

Might be worth a try. I'd probably keep the 3rd axis, just not the retracts. I like the yaw corrections when flying forward at medium to higher speeds. I've been basically flying both my 3 axis gimals with about 15-18 degrees restriction on the yaw with a little bit of dead band and quick...

Rob, I checked in to the UAV-CAN GPS on Can Bus port. Probably above my capabilities right now. Will watch it for the future. Appreciate your help and suggestions. Worked on the Y6 abit today. Little setback (timewise) in trying to get my ESC's into the 30mm arms. I wasted a bit of time...

That's what I thought, although I wasn't 100% sure if a brushless motor wasn't considered a servo or not.... The trooper Y6 main board has 5v on the board already, so am going to use that to pins 1 and 5 on the main power in on the Pixhawk and then use a buck converter directly off the battery...

Lightandair. Welcome to the forum and a place to get many answers to your MR questions. I for one have no idea if they are still in business although as a owner of a SuperX and also have the MiniX on preorder, I'd hope they are in business. They are not the most responsive of manufactures...

I will be ready later today to either pull my xAircraft SuperX or Pixhawk from one of my quads and put it on my y6 lw/ 6s batts I'm building today. My first choice is my Pixhawk, but hesitant without figuring out the power. Since I'm coming out of a buck converter and currently not using any...

For the PIxhawk, IMO, it's a 2 prong reason. One is redundancy of the power, but the other is to negate spikes. Here is a warning on the Pixhawk I took from one of their tech docs. It is dangerous to power the Pixhawk only from the servo rail, especially with digital servos. Servos may...

this is beyond me. Maybe it will help.... http://drones.webstanz.be/blog/pixhawk-flight-controller-power-recommandations

I found a redundant diagram for two 5 volt's going to the rails on the pixhawk. I'll go take a look. I've been using buck converters for everything for about 5-6 years with no issues so am comfortable with them. I'll go see if I can find it again.

Have another day or two to decide, but am having 2nd thoughts on Pixhawk. Looking at power supply for 6s batteries and getting nervous. I was going to just put 5v onto the output rail, but then read this warning .... It is dangerous to power the Pixhawk only from the servo rail, especially...

I was going to build my own frame with the Vulcan aluminum arms (which I am really liking) to maybe going with Quadframes y6. Then I saw the Trooper with 30mm CF arms and figured why not. Also the fact that is't 900mm and I can cut it back a bit when I find the sweet spot for props and the...

Decided to try a y6 with 400kv motors and my Pixhawk. I'm taking the Pixhawk off my development quad as it's earned my respect. Replacing the Pixhawk with the new SuperX MiniX. Give that a try. I've bought a kit with 30mm CF arms which is a little out of my DIY mentality. I've been using...