Search results

13" or 14" props with 6S will work good on 2826. I don't recommend you to go with Tiger 2820 830KV, it's only suitable for 4S. Too high RPM for 5s or 6s.

AXi definetely has better quality. I've used Axi 2814/22 on my Hexa and have been super happy about it. I'm also using Tiger motors extesively, MT2814-10, MT2820 KV830, MT2826 (KV550) and now waiting for some MN series. MT2814, came with orginal Ezo bearings but I believe they are so sensitive...

Well done guys. Nice work! Did you post stabilize the footage?

There are several reasons why I'm staying with MK for now. First, I've invested plenty of money on this platform (4 FC 2.1, 4 Navi Ctrl, lots of time getting to know the hardware). Secondly, the built in telemetry and multi way point. It costs more with WKM, and need to add some third party...

Hey guys, Today, I started getting rid of MK BL controllers officially by the help of Abusemark's I2C to PWM converter and some different ESCs. Mikrokopter's BL controllers work very good until you reach its limits. There's no need for programming, it's almost plug&play. But the limitations...

EDIT: http://www.amazon.com/Sony-SEL1018-10-18mm-Wide-Angle-Zoom/dp/B0096W1ONK%3FSubscriptionId%3D14Y3MT0G2J4Y72K3ZXR2%26tag%3Ddpreviewbuybox-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB0096W1ONK NEX6 and NEX7 is very similar in terms of what they offer. I don't...

An update about erased EEPROM settings. Today I was photo shooting for a customer. We did 4 flights, each of them was around 6 minutes. After the 4th flight, I landed to change the battery. Plugged in the battery, did the gyro calibration. I tried to enter the MK Telemetry menu but I couldn't...

CX730 is only good for videos; the stills produced by this cam is far worse than the cameras listed by rsun. For stills, I would take the NEX path again. You already have NEX7, so why not use it also for this system? If you need some wide angle, you can get the new Sony 10-18mm f/4 Zeiss lens...

And the guy is using a NEX-7, instead of NEX-5N.

Yes it's possible. You can adjust the channels in the menu (I can't remember exactly from where). You just assign the knob on that specific channel. Lets sya say you assign the knob to channel 8. If you are using MK electronics, in MK Tools you go to Channels tab and assign that channel to a...

The voltage warning means that, you're pulling more amps than the battery can supply, so it's draining the cells. It happens either the C rating is false; or the batteries finished their lifecycle. If the Lipos are not puffy, than it means C rating on the batteries are wrong and you're pulling...

Thanks for reminding the servocity chopper, they have quite neat products. I want stabilization in case I put on a cable, or over a truck or even a helicopter. Kessler's head is quite good; thanks for pointing that out.

Hello guys, The biggest camera mount for our RC toys that I know is Copterworks gimbal: http://copterworks.com/products/three-axis-camera-mount Have you ever seen any bigger camera mount system? When it's getting bigger, we get close to a system like CineFlex or Gyron. We have Radian and...

Shame on them. The pictures they took has FreeFly servos.

I meant, I am travelling a lot with my MKs with airplane. It's been over 20 times I think.

Andy, I had two weird behaviour with my MK setups in the past; both of them were not related to Xrays. * First problem was similar to yours; settings were erased suddeny. So I had to configure everything from the beginning. * My hexa lost its ACC level values. It was flying perfectly the day...

Quite expensive but worth to look: http://vimeo.com/49798151 And the product page: http://ecilop.tv/shop/parachutes.phtml

HoverFly is very close to my next choice of flight controller. Will sell my DJI W-M stuff which is sitting on the shelf since it hit the market for the first time. I have never been happy with it. After selling this, I will be definetely trying HF.

Nice transmitter. I wonder about the range you will get with this system. I had Graupner MX22 and Jeti Duplex system installed as a module on this transmitter and I could get 200 meters flying range maximum. Then I switched to Graupner MX20 HoTT. I'm happier now. I wonder the item, labeled as...

If that whole thing is one piece, it will be hard to ship it overseas?