Search results

What gimbal are you using now?

It looked thicker than my skyjib, which is 2mm i think.

Are the black dampers harder or softer? cant find them on their site? I have a pre titanium QR plate that only came with red and yellow.

What thickness CF are you making the frame from?

I noticed you are running a 100mw vtx, hows the range on that?

You need to check the batteries internal resistance; which is done on the charger. It sounds like its probably stuffed.

Hi have a coaxial skyjib, with tiger 3515 motors 400kv and xoar 15x5 props, running 6s battery. Thats going to give you pretty good flight times, but you could look into even lower kv motor like a 320kv which would give you a bit more efficiency. So far ive been getting 14 minutes with 2x8000mah...

Hi Dan, my names Ryan from Wellington; good to see another Kiwi on here. Talk to Efliernz. Peter is from Hamilton, im sure he could help or send you in the right direction.

I didnt crash Pete! I originally modified my ys-x6 one with a trex 450 boom to run the cable on the inside. But im going to run it on top with a foldable base. And the original top part doesnt sit level on the pole any more due to my modifications. But I ended up buying one off goodluckbuy.

Where can i buy a replacement gps mast? Preferably a DJI style one. Cheers Ryan

Do you feel they are worth the extra cost? There's a big difference in price when you buy 8. We're you able to up the gains with the t motor props or was it just a feeling of more locked in?

Is this the same camera but with a case? http://www.securitycamera2000.com/products/690TVL-Ultra-WDR-Pixim-SEAWOLF-HD-CCTV-Mini-Camera-2.8mm-Lens-OSD.html I was thinking the one with the case would be better as i can mount it on an angle. But is there a reason you like the open board version more?

what props will you run on it?

Im looking at getting some of the Revoletrix 10400 40c batteries; at the bottom of this page: http://www.store.revolectrix.com/Products/PLATINUM-Label-LiPo-Batteries-XH-equipped?range=41%2C53%2C53

Is the BEV-WDR 750s the same as the foxtech WDR 750s? http://www.foxtechfpv.com/wdr-750s-600tvl-wide-dynamic-range-mini-cam（Pal）-p-652.html http://www.rcmodelscout.com/FPV/BEV-WDR750-700TVL-OSD-control-color-CCD-camera/57754# With fpv cameras can there be firmware differences? Im looking at...

Why do you like the T-Motor props over the xoars? Flight time? Stability? Noise? Really interested, looking at getting some 16x5 xoars for my skyjib x8.

Yesterday when testing my Skyjib X8 I noticed the voltage sag between no load and hovering was .8 volts. This seems pretty high to me, can any one comment on what is normal or acceptable? Just some info on my multi: KW10 motors Xoar 15x5 props Herkules esc nanotech 8000mah 25-50c batteries...

Hi guys, ive got tiger 3515 props with the standard 6mm prop adapters on them, i was wondering if any one know where i can get some of the prop adapters to run the low profile carbon props? Also does any one know if they fit on the 3515 motor? Cheers Ryan

Ive made some more progress ony my SkyJib. I had a hell of a time trying to align to top and bottom motors, which i think caused some of my issue. Ive got them all pretty bang on now. I checked the tracking of my props also. Most were way out, one of my graupner 14x8s were out 7mm. and some of...

Sorry i meant the ys-x6 power management module? How ever that gryphon disk looks great.