Search results

I know man I am giving you a hard time on purpose :). I was letting people know that there is a dedicated support network there. If they are having trouble getting what they need there are some direct corporate employees at their disposal on there! ;)

Hi there! Did you put tape on your props to balance? Have they taken any hard hits? Also, is it a constant noise or rather only at a high RPM? I am thinking if it only happens with the 4S it may be due to speed. Let me know and we can help out further!

Good suggestion Pling! Watch out though Bartman just chastised me for referring off site. Apparently that's a BIG no no :P

Hi there Bart, The statement that they have support over on RCgroups in no way stated a preference between the two. It was purely to help one of "your" member's get the assitance they need. If they aren't getting the support they want and there is somewhere to get it "we" beleive it is the...

Just goes to show you that every company can have a bad/deffective product in production. I agree, try again and let them right the wrong!

Well if they have a dedicated amount of staff and are inundated with requests it would make sense to consolidate into one location. I guess it boils down to how bad you want the problem fixed. It's one login to create :)

Hi Octocam! Have you tried the method I have outlined or called them since the switch? I would try and PM Tahoe Ed as he might be able so send a personal request in for you! :)

I think you guys are in the wrong forum. They have set up direct consumer communication on RCGroups... I think the issue may be you are using mediums that they are not using. When they switched management and booted Colin out they opened up an LA office. They have been more than helpful and have...

F450 frame can accomodate an E600 motors set with 12 inch props. I would say you are good to go but make sure you have the right combo. If you go that low you may need a 6S...

Want to elaborate instead of dampering someone's excitement? -Triple: Glad your excited brother! :)

I would go with a simple fatshark pan and tilt system (servo driven). It will probably be the easiest. You could even hook it up through the naza to be a servo gimbal plus head tracking.

The short answer is YES you can do what you are asking. There are going to be guys on here that chastise you for wanting to do it that way but really all that matters is that you are meeting your clients needs. If you client wants a shoot done with a specific camera other than a GoPro then yea I...

I think licensing leads to creating a governing force which I don't agree with. I do however agree with the fact that like a car, motorcycle you need to take a course to gain an understanding of your craft. I think the FAA should send a list of approved "courses (entrepenuers could design them)"...

I just recently put a zenmuse on my tbs with an E300 propulsion system. I use a 4S 4250 mAh 65C battery and get a solid 20 minutes of flight before NAZA first level protection flicks on...I love the setup. It's no racer but it's an amazing filmer.

Can't escape prop wash. That is the wobble on the decent you are facing. General rule is to decent at a slight forward or backward motion/angle. That will help you from descending into your own prop wash. The reason you get it with the bigger blade is the bigger the blade the more prop wash :)

I would check the LED sequence on your Mini iOSD. There is a card that came with it and you should be able to match it to make sure everything is working properly. If that doesn't work revert the software and try that. If those two don't work sounds like a defective product, in case just send it...

Based on what I have flown: mini quads, tris, quads, and Hex's I like quads the most. I would say for go pro filming an F450 (now comes with E300 propulsion system) is going to be your best bet! The E300 kicks some serious tail with a 4S battery! You eliminate all vibrations as well! I would...

Looks to me like someone didn't check which frequencies were around where he was flying!

Look at the DJI Propulsion system owners thread as they have some great examples on there from Dr. Turbo! He said that with the E600 and a 6S battery you can push 30+ minutes with a fully laoded down quad (all DJI's knick knacks). That runs the 400kv system, 12 inch props, and 6S battery. Guys...

Can you post some pics with your F450 in there please?