Search results

My fault

mods, sorry if this is inappropriate but I could not find an off topic section of the forum

you guys are dropping knowledge in here. Thank you

what you mean by the perfect 50% hover. thank you, I will search for them

have you plugged into the phantom assistant software to check what the altitude limit is set to, the controller calibration, motor settings etc? first thing I would do is plug it in and reset everything to default. I'm a novice too but that's what I would try

I'm curious what you mean by that I don't find any contact information for avroto online. Neither can I find specs unfortunately.

Max prop size the frame will take is 17"

sorry for the delay. I just heard back regarding the weight of the copter without batteries it is 9.6 pounds we used two 6s batteries. each weigh 2.5 pounds I will hear back about the max prop size shortly. understood about batteries. I will do some research on that thank you

the five pounds is to simulate the max weight of some equipment we are developing. We are experimenting with copter s for agricultural purposes. I'm sorry I can't be more specific

We want to achieve 20 minutes with lipos and a five pound weight. we currently have 14 WKM system, 2.4g data link long range video transmitter 1 zippy compact for video 2 nanotech 6s 8000mah avroto 3520 k 400 motors we use props from the S 800 here is the copter, motors, small camera I'm having...

not at all. Preach, I inhale this stuff. I'm currently using a hyperion charger. I'm sure it says it. I just need to pay more attention to the display. yes I'm very serious about this I'm currently reading the lipo sticky by bartman. now back to the OP it's possible that my batteries were...

:facepalm Lol thank you, how many times has that been asked on this forum before?

okay, I've never used the alarms before but I'll try it on. how far away can you hear them alarm? also I want to understand how you are keeping track of how many mah you are putting back in after that first charge. your directions: • with two fully charged 8000mah batteries fly 5 minutes and...

I am unsure. Instead of returning home to land, the copter rotated in place. that's when the pilot took over. I was still reading 22.xx volts on the ground station when everything cut out. someone recommended adding a third 8000 mah or running two 12000 mAh. I have read a lot about issues with...

Hi from California. We are a couple of guys experimenting with Multicopters for agriculture stuff:)

hello all, This is my first post. I apologize if this is in the wrong section. I should preface this by saying I'm just starting to break into the copter community and what a cool one. I need a little bit of help diagnosing a problem we had that caused the crash with our hexa. have a link to a...