Search results

Tryin to downloas WKM, naza software... I got a new laptop from work, but i cant get to the site either from my pc or new one.... Could some one else try and post back. I just goes to a blabk page, dji is temporarily unavailable Sent from my GT-I9100M using Tapatalk

hey guys, ive been lookin around and no dice, i want to take two of my 6s 5000 and double my time, so i essentially want a 6s 10,000mah.... how do i do it, will parallel wiring make it 12s? Thanks in advance

Anyone know the specs in the servos in the XAgopro gimbal?..... Will i see better effect if i swap in 2 hitech 7965's i have lyin around? Thanks Sent from my GT-I9100M using Tapatalk

I have found since ive been flying my F550 WKM with its payload on, and which i believe to be beautifully balance on x and y axis, it doesnt rock forward or back on any of the arms i balance from. But i have a slight forward drift in atti that needs a slight ampount of constant input to correct...

I have bought a tm 1000 to go with my ar8000. It will bind ans function fine, but if i power everything down then on again it is not keeping the bind, rx/sat have a fast blink WKM shows fast red led for no connection and no response from radio input, rebind all is well power down, repeat lol...

Hey there, I am getting my self a nex5n for regular use and to throw on my gimbal for pic and vid aside from my wide angle gopro video that im getting tired of.... Question is how do I organize taking pictures, do i need a remote shutter setup of somesort? all new to me just dont want 500...

Like it says, im runnin a 4s 4000, on 10" graupners, 30 opto on a f550 with xaircraft gopro gimbal/gopro. AUW Is unknow, i havent done the math nor do i have a scale Sent from my GT-I9100M using Tapatalk

Ive seen john did a build with Xaircraft landing gear under it but i couldnt see in the pictures if he drilled through the distribution part of the board, im doin the same and can only see that there's only enough room for two screw per mount instead of the 4 it would normally use... I could...

I have the wookong all set up with my dx8, but i cant get a mix to work like it does on my naza for failsafe? any ideas

I have the wookong all set up with my dx8, but i cant get a mix to work like it does on my naza for failsafe? any ideas

What do you guys use to attach your wookong gps to the pole.... Aside from the aluminum pieces, what u using to glue stick to bracket Sent from my GT-I9100M using Tapatalk

Hey guys, still not fully sure on this voltage cut off business, im understand the batterys operating voltage and what not, that lipos shouldnt be taken down past 80%, I know how to check for mah usage by running for say 5 minutes and seeing what i put back to get a flight time.... but entering...

Call me a noob.... I am lol, i havrnt bought yet but am thinking about getting some scorpions, how do i attach the prop... It doesnt have a threaded end like the dji. Are there threaded ends say, 8mm that attach as a pinion would on my helis? Sent from my GT-I9100M using Tapatalk

Just out of curiosity and so i can do a better job of tuning, Basic gains are Roll, Pitch, Yaw, Vertical ? Attitude has 2 Pitch and Roll? .... what exactly is the definition of attitude. does vertical gain basically refer to the altitude hold ability. Should my attitude pitch/roll generally be...

MkTr professional under flamewheel 550, stock motors/esc will it work well or should i b looking to a different frame or motors all together, running wookong m Sent from my GT-I9100M using Tapatalk

Just looking a some setup mictures and noticed a couple hex builds are set up to fly +6 and some are x6 any benefit to one or the other? build will be flamwheel 550 w/ wookong m Thanks

Will i have heat or any other issues with graupner 10's on 4s with stock 2212/920kv motors? Why do they suggest onky 8"props Sent from my GT-I9100M using Tapatalk

From what i see fatshark goggles are popular, this fpv business totally interests me but i have no idea where to start, could someone point me to a setup or items i need, i have 2 gopro, s one old one 2nd edition... Just dunno what to get for goggles, nase station? And video transmitter...

I saw on here a few days back a thread on three motors sunning fine and one stuttering.... I have that issue on my new kit, anyone remember what the final outcome was? brand new motor already toasted?

Ive seen some do it heli others acro, manual says acro.... Are there any benefits to either or? Im running a dx8, naza should b here in a day or 2. Just wanna know what route for radio set up, i have heli set up experience and understand the whole mixing game. From what ive rad so far we...