Search results

I bought a Gentled for my nikon which I wont be flying since i got my nex5n any way of getting it to shutter my nex 5n or is the infared bulb completely different Thanks Elliott

WKM and Thomas Scherrer long range cuts range Anyone on here have an issue with thier WKM and Thomas Scherrer(TSLRS) long range gear? I have done some testing because my range was terrible and my findings are that the WKM system is causing the loss of reception, During range testing with...

Trying to calibrate my throttle on my ad-6 WKM, i have calibrated my tx and whatnot in the software. Then i power down and attempt to calibrate my throttle high and low and i cant get the same tones to happen as describred in the manual for esc. No matter what i get the standard startup...

wondering if 10" props are too much for these? I know it will spin em but will they get hot Would they be better of on 8 or 9 " props... im still learning about the whole KV business

Hey fellas, I want to set up a mix on a two way switch... Id like to program a mix for gear to gear so i can trim it by like 25 points when switched and activate a failsafe on my naza. I know where to program it but i cant select to mix gear to gear only gear to another channel, i did it on my...

Im going to be wiring up my lrs rx for some low cost test in case of failure/signal loss, What kind of voltage does the naza output to the RX, For my system ill be needing 5-6 volts. Should i run a BEC and use leads i have that only offer signal or will the naza with standard wiring b ok? Thanks...

I need a dist board for my ad6 HL w/ 30AMP esc's and axi 2814/22 motors.... anyone known an american dealer for these or similar? i dunno how or what i need to make my own, ill take instructions and a parts list on that too lol ThANKS

I smashed my hero2 the other day :(, Has anyone used a vio pov? i can get one for similar price as gopro... thanks guys! Elliott

I know this isnt the wtb forum but where to buy lol, figured this would get more views here. I live in canada and can have it shipped to us or here!

also, is the jukebox a requirement for tuning it in , if so id like to grab one of them aswell Thanks

Probably 70 feet up and maybe 150 feet away, just went over the tops of some trees behind my house and i lose all control, my f450 first kinda hesitated and i thought wtf, then it started drifting and i realized i hand no control, crazy part is i was able to cut the motors off... AR8000 and my...

Any one have any experience with these.. I need to pick up some esc's for my build of axi 2814/22 and cant decide on escs... Any thoughts are appreciated Sent from my GT-I9100M using Tapatalk

I have a wookong m but will have to strip one of my kopters to put it on my new ad6, is flightctrl me anygood, bettar than wkm? Or should i strip the wkm and get a naza or sumthin for my 450 Sent from my GT-I9100M using Tapatalk

Im building a AD-6 HL, with 30 amp esc's and axi 2814-22 motors, am i better off with APC slofly 12x3.8, or the thin electrics? I wanted to get a set of 13" props to try but the thin e's have are 13x6.5 and im wondering of the pitch will be hard on my escs?

Im used to buyin graupners but they are tough to find in a set oc 5 right now.. Apc's do they sell em as a L and R? Id like to try the tgon electrices in 11" do they come as a pair... Thanks Sent from my GT-I9100M using Tapatalk

Alright, Ive had my f550 for a bit and my 450 and have flown both with my wookong m installed, I find both are very stable when tuned right. My dilemma is, I want to hoist up my nikon D7000 weight w/ lens about 850 - 900grams, dont have it yet but ill be looking at getting either an av 130 or...

Got a firm reminder this morning to always check prop nuts pre flight lol, flew a few feet past myself and straight into a cement retaining wall... 1 motor took the brunt of the damage the rest kinda disintigrated on impact, Needless to say i need a new motor, should i stick with the DJI's...

I have one under my F550 WKM, Im having trouble getting the gains dialed for the gimbal.... just cant find the sweet spot it always either seems to over compensate or not keep up, Is there a servo i could look at upgrading too? Or should I wait for PH rocksolid lol

Any way to score more travel out of my servos. Would like to b able to take off and fly a bit, then drop the tilt for some overhead shots Sent from my GT-I9100M using Tapatalk

Its in my price range 1000 bux is about all I want to spend... mind you i get it cheaper, basically as long as future shop sells it my buddy will set me up. Is it very good? does the video it record stack up agains some of the other competitors ive seen, Also looking at a GH2 but Futureshop...