Search results

This is where I powered my vtx from but of course I don't know that any different way is incorrect and I posted in the TBS forum

Oh I get how it works as I have the same gig' One of your pics looked like you were pulling vtx power from the solder pads that are by the mini plug "while" the vtx connections are in the plug at the same time. Just wasn't sure if you should move the vtx power wires to a different location

Try takin those -/+ vtx wires and putting those on a regular -/+ contact patch... Not by the plug? Also should the vtx core portion be soldered as 5v or 12v. I'm using the immersion so I should have that as 12v like the cam correct?

Are your powering the vtx -/+ wires on the cam side?

Yup, I'll snap pics tonight if I don't get stuck here until 10pm

The Attitude gain is the "stick input reaction" while main gains are the Naza reacting to the environment without input. Test it by putting the Attitide gain at 150 and LOS flying go forward at a good speed and let the stick input snap to center watching the MR auto-level very hard. Lower those...

My values are around here... I have the basic and Attitude gains assigned to 2 different knobs on my 8FGs so I can adjust on the fly if needed depending on wind & such

Hey Peter, you're right never user trim or sub-trim If you have drift first make sure your COG is spot on, re-calibrate your Tx sticks, re-calibrate the IMU through the tools menu in the assistant software, re-write all your menus and re-calibrate your compass. That typically stops drift and...

Could just wrap the whole thing with thermal tape...

Gotcha, the adjustability is a big deal maker/breaker for sure if needed. RMRC is my favorite FPV site by far

Hey Rob, stand behind your MR and if it's going forward the left is like the driver side door on your car as far as direction. Hopefully that helps

After you change the values hit the "write" option up top to lock them in.

Arizona is a bit too far, lol The values will remain red until you tab off and write the new value. It's the way to indicate one has been changed.

Have you guys tested the new -90rx module in the Dominators? I'm very pleased with mine... ReadymadeRc is amazing and you'll get every cable needed when buying a "custom goggles kit" if you choose that route

Dean where are you located incase you need some help?

Ntsc

I got video straight to a TV so going to make a bypass and go 12v to the cam and then vtx to see if I can rule out the vtx or not

Well that's the reason I mentioned a video that Kloner has posted and I saw "lockout" mentioned with a tilt and went right into a bush since I don't have experience with this. Also I know another person who had their MR dump multiple times when it was 40 degrees very early in the morning. They...

Sorry to hear, sounds like a lock out... Kloner had this happen so maybe he can chime in as to what causes this to happen

Is if rolling to the same side everytime?