DJI Introduce the Matrice 600



The Matrice 600 (M600) is DJI’s new flying platform designed for professional aerial photography and industrial applications. It is built to closely integrate with a host of powerful DJI technologies, including the A3 flight controller, Lightbridge 2 transmission system, Intelligent Batteries and Battery Management system, for maximum performance and quick setup.

m60002.jpg

TOTAL INTEGRATION

The modular design makes the M600 easy to set up and ready to use in just minutes. Its dust proof propulsion systems simplify maintenance while actively cooled motors make for reliable operation during extended periods of time. All Zenmuse cameras and gimbals are natively compatible, and a maximum payload of 6 kg allows it to fly the Ronin-MX gimbal and a range of cameras from Micro Four Thirds systems to the RED Epic.

m60003.jpg

SMART FLIGHT SAFETY

The M600 uses sine-wave driven, intelligent ESCs to ensure it performs accurately, safely and efficiently while A3’s self-adaptive flight systems adjust flight parameters automatically based on different payloads. The A3 can be upgraded with two additional GNSS and IMU units to A3 Pro or with D-RTK GNSS for enhanced accuracy.*
*A3 Pro and D-RTK GNSS are sold separately.


A3 PRO

With triple modular redundancy and diagnostic algorithms that compare sensor data from the three sets of units in real-time, the A3 Pro ensures that the M600 flies exactly as expected.


D-RTK GNSS

The A3 GNSS system can be upgraded with centimeter-level accuracy. Using dual antennas, its heading reference is more accurate than a compass sensor, and it is able to withstand magnetic interference from metal structures.

m60004.jpg

EXTENDED FLIGHT TIME AND TRANSMISSION RANGE

The M600 features an extended flight time and a 5 km* long-range, ultra-low latency HD image transmission for accurate image composition and capture. The M600 uses 6 small DJI Intelligent Batteries, allowing it to easily be shipped to wherever it is needed. A customized battery management system and power distribution board allows all six batteries to be turned on with one button press, and keeps the system in flight in the event of a failure of a single battery, and allows users to check the battery status in real-time during flight.

m60005.jpg

PROFESSIONAL HD TRANSMISSION

DJI Lightbridge 2 has been designed from the ground up to meet the requirements of professional broadcasting, offering high frame rates and HD live streaming. USB, mini-HDMI and 3G-SDI ports support video output at up to 1080p/60fps or a broadcast standard output of 720p/59.94fps and 1080i/50fps.

m60006.jpg

POWERFUL APP CONTROL

The M600 supports the DJI GO app and the brand new DJI Assistant 2. Get a live HD view, battery status, redundancy status, transmission strength and much more, straight from the DJI GO app. DJI GO is also the control center for the camera, giving access to shutter speed, ISO, photo or video capture on any Zenmuse X series camera and remote focus and aperture on the Zenmuse X5 and X5R cameras. The brand new DJI Assistant 2 supports firmware updates and the new Ground Station, and comes with a built-in flight simulator.

m60007.jpg

OPEN TO DEVELOPMENT

The M600 is fully compatible with the DJI Onboard SDK and Mobile SDK to meet the requirements of those building software for industrial applications. It has a dual parallel CAN and API ports for connecting DJI devices including the Guidance sensor system, the RTK GNSS units or third party components of your choice.

Learn More
 

JLO

Member
So at $200 per battery each flight needs 6 batteries that is $1200 worth of batteries lets say operator is ready to have enough batteries for like 4 flights that will cost you $4800 just on batteries alone hmmmmmm?????
 

Carapau

Tek care, lambs ont road, MRF Moderator
I dont get this battery thing on the Matrice unless DJI are going to do something else or reduce the prices considerably.
 

Top