CInestar 8+ 3axis CS gimbal + HFpro + 3x Radians + lipos + a lotof extras

PaNt

Member
Hello guys because of lack of time i have to sell my Cinestar CS 8 with all equipment included..

1x cinestar 8
1x 3axis cinestar Gimbal
3xRadians
1x Hoverfly pro board
1x Transmitter Futaba 8fg for pilot or Cam operator
1x reciever Futaba 6008HS
1xFRky receiver for Futaba and use for gimbal
8xtiger motors MT2814-11 KV710
8x turnigy esc working great Tested!!
6x zippy 4s 8000 lipo (2 orange packs were 5s and did them 4s..)IR 1.5 - 2.0
10x xoar 14x4 props WOOD ballanced
10 or more APC 14x4.7 props
1x Video link receiver and transmitter 1.3ghz for FPV
1xVideo link receiver and transmitter 5.8 for camera operator
2x 8inch LCDs for CAm oper and FPV
1x Bec Castle creations 10AMper for Cinestart
1x Bec turnigy for Gimbal

++++
I give in the offer and 3motors +Alexmos 3axis Controller for a Brushless gimbal either do a new gimbal or you convert the Cinestar gimbal.


All these for 6500 Dollars..!

I have done somewhere 250-300 flight with this machine..

The bearings on the motors are new ABEC 5 bearings from Boca..

SOme videos of the machine you can see here and photos too








 

Attachments

  • IMG_1598.jpg
    IMG_1598.jpg
    100.1 KB · Views: 430
Last edited by a moderator:


PaNt

Member
Guys if you don't want all these things we can do a better offer with less things and better price off course…!
 

Old Man

Active Member
Interested but it appears you are in Greece? If so that pretty much prohibits pre-sale visuals
 




PaNt

Member
New price...
5500$

If you want you can buy in parts..

Include:

1x cinestar 8
1x 3axis cinestar Gimbal
3xRadians
1x Hoverfly pro board
1x Transmitter Futaba 8fg for pilot or Cam operator
1x reciever Futaba 6008HS
1xFRky receiver for Futaba and use for gimbal
8xtiger motors MT2814-11 KV710
8x turnigy esc working great Tested!!
10x xoar 14x4 props WOOD ballanced
10 or more APC 14x4.7 props
1x Video link receiver and transmitter 1.3ghz for FPV
1x 8inch LCDs for CAm oper and FPV
1x Bec Castle creations 10AMper for Cinestart
1x Bec turnigy for Gimbal
3xBrushless gimbal motors for 1.5kg Cams
1xAlexmos Controller 3 axis
Thank you
 
Last edited by a moderator:




PaNt

Member
on The gimbal you see a Carbonplate that is not the original.. Under this plate there is the original … This is an Addon from me..

Everything you see (gimbal and cs8) is bought from Quadrocopter.us

They are Original..!
 

PaNt

Member
NEW PRICE 4600$ because Futaba 8FG and REciever are SOLD…

You can buy whatever you want separately.. Ask for Price..

New List
1x cinestar 8
1x 3axis cinestar Gimbal and
3xFreefly servos
3xRadians
1x Hoverfly pro board
1xFRky receiver for Futaba and use for gimbal
8xtiger motors MT2814-11 KV710
8x turnigy esc working great Tested!!
10x xoar 14x4 props WOOD ballanced
10 or more APC 14x4.7 props
1x Video link receiver and transmitter 1.3ghz for FPV
1x 8inch LCDs for CAm oper and FPV
1x Bec Castle creations 10AMper for Cinestart
1x Bec turnigy for Gimbal
3xBrushless gimbal motors for 1.5kg Cams
1xAlexmos Controller 3 axis

You can check it EBAY here

http://www.ebay.com/itm/221402273161?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
 
Last edited by a moderator:


PaNt

Member
How much for the gimble and 3axis comtroller ?

If i sell the gimbal i will give gimbal radians and servos and alexmos..
You want the 3 motors too??

all these for 1400euro!!(cinestar gimbal not the homemade as its not finished but i will give it to the new owner for free!!
 





DucktileMedia

Drone Enthusiast
I feel your pain. Selling helicopters is a real PITA! I just finally sold mine and the guy walked away with a steal. But the amount of hours involved is ridiculous! Next comes life long customer support AFTER the sale, for free of course. uggg. Good luck man. :)
 

Top