Recent content by yosemitepark

got my qav500 up and flying and it tracks smooth and flies great. when it is in a hover in atti the naza keeps hunting for level as in it keeps kicking the nose up then down, then up every few seconds. it is as if it is always seeking level. this does not happen on my other naza builds. basic...

testing out some 2.7k as the quality looks quite good on the raw files. finally got it to render out the full 2.7k in sony vegas 12 with no problems you can select "original" under the youtube quality to get the 2.7k

4k Cinema jpg frame capture. the detail in the original file is quite good. it did lock up the gp3 when i stopped recording, waited a minute or more as i thought it was writing large size file 2.8 meg jpg http://www.myyosemite.com/sites/default/files/archrock.jpg

i thought the same thing that it would be to heavy but saw a photo and contacted the flyer and said it worked fine. a tad tail heavy, i added a extension out back to get the battery further back. besides that it flies fine although the flight time is reduced. raw footage, just levels in sony...

i boot the naza up and after 30 secs or so i get the gps lock, one yellow flash in atti, one green in gps. as soon as i give it throttle both go to 1 yellow + 2 red, 1 green + 2 red. when i land and throttle is off both go back to full lock. could this be some kind of interference from the...

ht-fpv with sony nex 5n

using dx8 with naza. have read that folks use 0 30 50 70 100 or something like this for flatter around 50% for hovering

was wondering what folks use for throttle curve and expo? flying a ht-fpv with naza gps thanks

hard to do if you are miles from a computer and internet this person had the same problem and used copper foil http://www.rcgroups.com/forums/member.php?u=345406

hero2 here is a video showing the problem

the gps antenna is to close to the gopro. when the gopro is turned off i get green, turn it on and its green and 3 red. bought this from witespy and curious as to why they didnt know this

the naza gps has stopped working on this 2 week old ht-fpv arf from witespy. it did work 2 days ago as i had rth working. now i get no lock set up with dx8 on 3 position flap switch. assistant shows blue for all values, gps/atti/man. i can let it sit for 10 minutes or more and all i get is...

naza-m newbie questions hi new to quads. i have built and flown many helis from 450s to logos with beastx, sk720 and hc3sx controllers bought a hover things 450 frame that has Suppo 2212/13 1000kv Brushless Motor and hobbywing esc's. it was wired for a fy-90q controller i have bought a naza-m...

hi new to quads. i have built and flown many helis from 450s to logos with beastx, sk720 and hc3sx controllers bought a hover things 450 frame that has soppu motors and hobbywing esc's. it was wired for a fy-90q controller i have bought a naza-m and had a few questions should the esc control...