Recent content by xXLupusXx

have a look here and other movies of this guy:

Ordered it, should be here any day now. then I will be able to get my Hexa of the ground finaly

Is this AT9 / R9D compatible with a Naza-m V2 flight controller ?

Thank you Hoki, I just 5 mins ago came accross the AT9 and really like it. Euro 99 is not bad at all. It gets good reviews so that might be the one.

So I decided to bite the bullet as I was not getting anywhere with my KKMultikopter control board. After having figured most things out it appears that pin 5 is dead and does not work. So I decided to oredr a Naza-m V2. Now i also want a better TX and rx to heve a proper combination that will...

Thanks for your input QC. I can raly recommend the JRC H8C as a learning copter. Just order it with some extra motors, ballbearings to replace the bushings on the prop shafts, some extra props and some batteries if you want more then 6-7 mins flying time. The whole thing is under a 100 bucks.

Thank you OhHey, you are most helpfull. I have a Totem Q450 hexacopter frame with motors (2212, 1000KV) props (3blade 7045 now and 3 blade 8045 on the way) 30A esc, 3300mah 25C battery (5000mah on the way). Furthermore I ordered a landing skid to get enough ground clearance for the gimbal and...

Thank you OhHey, Yes, I should have been more clear and I realise now that what I want is not possible. The Radiolink R7EH that I have simply does not have enough channels to do all I want. So, what I want to start of with is to equip my Totem Q450 with a FC that makes this hexacopter fly stable...

Since i am a beginner and on a low budget I was thing of using a XiaoMi Yi Ambarella A7LS BSI CMOS and a KK2.15 fcb. The question is if the KK2.15 is compatible with my Radiolinx rx (FHSS). I would like a naze lite but that would require a new TX and rx. I cannot use a FC that requires...

Good Day all, What would be the best FC to buy for a 450, 550, 650 with camera and gimbal, gps, return home, route planning. Thanks for some advice.

I am planning to buy a KK2.15 controller but cannot find anywhere if it is compatible with a FHSS rx.? Can anyone answer this question ? Thanks

And.....I got it working! Found a youtube movie from some Indian chaps who explained in detail how to calibrate the ESC and to arm the board. It is different than what the friggin manual says. But it works now. I am happy and cannot wait for the weather to clear up to take her out for a spin.

Can anyone tell me what would be the best controller at this moment for a hexacopter intended for aerial video/photography. I intend to upgrade from this KKmulticopter board but do not know what to choose. I am not into racing or FPV but would like GPS, trip planning and follow-me mode if...

Thanks mate, it might be the problem. How did you adjust the travel value ? I use a Radiolink T6EHP-E.

My Hexacopter is ready but cannot fly because the darned KKmulticopter controller will not arm. Googled and found many issues, tried all suggestions but nothing works. Anyone any smart ideas? I would welcome them. Ande here is a picture of this Totem Q450.