Anybody had this happen? When using bluetooth headsets between pilot and the camera operator, we have experienced motors starting with no input from the radio. Slow spool that eventually will run them at full speed. As the long-range bluetooth headset is a new addition to the equipment, we...
Selling a Z15 GH3 gimbal. It has been adapted for GH4 use with the Kopterworx HDMI converter. Both GH3 /4 can be used. This gimbal has served me well.
Asking 1000 euros. Buyer pays shipping.
Tuomas
For sale. Vulcan UAV 900 hexa frame with:
Wookong + iOSD mk II
Zenmuse Z15 GH3 modified for GH4 with Kopterworx HDMI converter
Excellent gimbal dampening. Never any vibrations in the picture.
RC Timer / DJI retractable landing gear
Super bright LEDs
Rain dome
Boscam 5.8 GHz video transmitter...
Hello, if I remember correctly the flying weight is about 15 kilos with the RED and the Mini added a few hundred grams. This naturally depends on the lenses used. But in general the weight increase is small.
Tuomas
Atti mode or GPS mode. When filming, always a 2-man setup. Only advantages while doing that:
Better material for the customer
Shorter flights with less retakes
Pilot has always 2 extra eyes to help if needed
Nobody steals your transmitter or disturbs your flying without facing the camera op...
We have flown them for a while now, know the designers well and are in constant dialog with the factory. They are based in Tallinn, Estonia just 2 hours away from us in Helsinki. We have traveled and operated the frame in Europe and Africa. The frame can take extreme heat and be flown in almost...
I use 2 receivers. The first, controlling the heli on channels 1-8. The second for the gimbal on channels 9-14. On my model memory the gimbal controls are always there if need to fly alone. Then the gimbal rx is paired to my flight transmitter. Usually, with a camera operator, the gimbal rx is...
The arms are wrapped tightly in white sheet. Then there are long torn sheet strips hanging from the middle. I glued them together in some spots with hot glue to make it a bit more rigid. Then there is a painted styrofoam skull with LED eyes, and some white LED strips pointing down lighting the...