Recent content by triise

Hi, I use 2 OSDs and switch between them using a eBay 3-way RC video signal switcher. the iOSD mk II is supposed to have a day camera, but it wasn't mounted at the time. The other OSD with coordinates is a MinimOSD which is mounted between the FLIR and the switcher. I switch between daycam...

Unfortenately I'm not the owner of this system anymore, but the setup is pretty straight forward. I didn't do any modifications to the 7C, but connected the servo cables to the channels on the R617FS in the order I wanted them to work. With a little fiddling you'll sort it out I'm sure :)

Gentlemen! After some research and investigation it looks like it's pilot error after all... I've now sold the T15 frame, A2 and FLIR (which survived) and will be going into the Phantom business as the risk / cost is to high for me on these expensive crafts. Maybe I'll pick it up sometime...

Hi Glenn & Econfly, Thanks for your input. I'm pretty sure I didn't switch to manual mode, but I cant be sure. I have my IOC switch and Mode switch side by side and maybe, just maybe I may have accidentally flipped the switch (But if the log says I did, I probably did...). But heres the thing...

Actually the first thing that happened was that the OSD stopped showing data on my video link. I then powercycled the Tarot and it came up good again. Then after some minutes it stopped again, and then only seconds after this happened. (Loosing the OSD has been a problem for some time, and I...

Hi, Yesterday my T15 with A2 flight controller dropped to the ground. Short version about the crash: I was flying about 300 meters from HP at an height of aprx 100 meters. Suddently the multi did a flip and stabilized about a second later. Then i put it into HP on the IOC and pulled the stick...

I don't think it's a bandwidth issue as the avl58 is an analog vtx. And the overheating sounds strange as it only happens when I fly far away and get a poor video signal. Will check cables and connections, but that also seems strange as it seems to be connected with the distance from HP...

Using the DJI AVL58.

Hi, I have a Tarot T15 with DJI A2 and iosd mk2. Sometimes when I fly longer distances away from my HP (600-700 m) and the screen starts flickering the osd on my video downlink disappear. I still get video and the FC works as it should. Anyone experienced this before?

Is it sold yet? Is this for the GH3 or GH2 camera?

How much do you want for it? and how much for shipping til Norway (Zip 9360)?

Interested in a DJI A2 flight controller in good condition.

Did hook it up today (with some higher pulse) and it worked like a charm! Anyway, I did talk to the tech guys at my workplace (CIS Engineers) and they drew and discussed for some time and concluded that it shouldn't be a problem. Found a dc-dc regulator at foxtech which I have ordered and will...

No one care to share any thoughts or suggestions?

Hi, I've just preordered the Foxtech Kraken 130 octocopter. (http://www.foxtechfpv.com/foxtech-kraken130-octocopter-arf-combopreorder-p-1335.html) As of now its ordered with WKM (v3 GPS / and v1 IMU), And I've been trying to decide if I'm going to use the WKM or the A2 on this. It's quite a...