Recent content by Tim Borgardt

  1. Tim Borgardt

    DJI H3-3d problems, Need some help!

    I am trying to set my H3-3D gimbal up, and I am having problems. I am trying to hook it up to a DJI A2 FC. I installed the gimbal and H3-3D GCU, but when I power the system on, the gimbal just goes up and down or left and right continuously. The led on the gimbal seems to be red the whole time (...
  2. Tim Borgardt

    Dji Naza M v2 - drone losing control - Advice Needed

    I took the drone out today to try setting the gain again. It flew a little better but I am still losing control. The drone weighs 3.5 lbs RTF. The pitch and roll gains were set between 140 and 205.
  3. Tim Borgardt

    Dji Naza M v2 - drone losing control - Advice Needed

    Just to make sure, RTF weight is ready to fly weight, or the weight of the drone set up to fly, right?
  4. Tim Borgardt

    Dji Naza M v2 - drone losing control - Advice Needed

    The weight is 2.75 lbs and the throttle is at maybe 55% when hovering.
  5. Tim Borgardt

    Dji Naza M v2 - drone losing control - Advice Needed

    I recently built my first quadcopter with: S500 Readytosky Frame Emax 2213 - 935 KV brushless motors with 10 x 4.5 props 30A HAKRC BL_Heli 32 ESCs Venom Drone 3s 5100mAh battery The copter takes off successfully and is able to hover for a few seconds until it needs to correct itself (if the...
Top