Recent content by Superketch

I think you are in RTH mode.

Well I don't have a gimbal but that could be a problem. A little about my rig. I started with a f450 and then I extended the arms with the long rctimer arms so now my copter is a 700mm size. I'm using stock dji opto esc and sunnysky 2216-800kv motors. Spinning 10x4.5 props. On 4s 5000 mah...

This morning I woke up and looked at DJIs Facebook page and it seems they just posted a newer update and have fixed the bugs. You must download a newer version of the assistant software v2.12. And then it allows you install the latest as of today firmware v3.12. I just finished setup and I'm...

Trades are welcome! Let me know!

Hello I have (10) 5 CW/5 CCW. Gem fan wood props. 6 are new and 4 are used but in excellent condition no nic or scratches. These props are excellent they do not work for my new copter and I don't need them anymore. They have 7mm hubs but a thin shrink tube spacer can be used to get them down to...

Hey everybody thought i would share my pics of my upgraded Super Flame wheel i haven't seen anybody do it with the quad just the Hex so i thought i would post some pics. I used the RCtimer Long arms. they weight about 125 grams each which is a little heavier. the arms are pretty rigid and the...

has anybody tried one of these or tested it? i'm thinking of getting one just to see how it works alot cheaper and simpler, then some rigs. if you buy there basic RX it's only 35$ so that's 55$ for a RX and TX and the best part is it is tiny! runs on 3.3V probably just plug it into tiny...

The leds are 20mm in diameter which fits perfectly under the motors with doulble sided tape

Im thinking of making tiny reflectors so that the light bounces back at props more. And then perhaps dipping the prop tips in illumendcent paint before i balance them. http://www.hero-ledstore.com/heroled-1w-led-c-2_4.html...

after doing some research i bought 4x 1 watt LED's 2 red and 2 white and mounted them directly under the arms i wanted something simpler and cleaner that would bright enough for day. i came up with these. each LED runs on about 3.2 volts so it works with 3s battery i'm testing differant...