Recent content by SkyBound001

I'd say it all depends on what your going to put it under. If its a S800 or something like that i'd say stick with the zenmuse as its 400g heaver with a GH3 and a 12-35mm lens, if its a sky jib or cinestar etc then it could be worth looking at it. I've not used a zenmuse so can't really comment...

Hi, Was done with dual operator. The tilt works ok up to about 20% and then starts to jitter a little. If tilting down with the radio its ok to about 80%, but if the pitch on the copter changes it can cause some random movement. The day we were testing was very calm and so little in the way of...

Hi Guys, Nothing special - just a a bit of testing but here are a few clips onboard our Octo with a GH3 on auto. We've got some tuning to do and some balancing to resolve as when you add on all the video gear it upsets the roll balance and in turn the pan - doesn't really effect the video, but...

Hi Guys, Just a heads up - check the grubscrew thats under the roll motor. I just discovered mine was not done up and the whole thing could be pulled off. I only discovered after a full days filming!!! Got so say the footage is far better than the old AV200 i was using by a million times!!!!!!

I opted for the radio gear they sell on the shop and to be honest if you have the money its worth it. In the box was a lead already connected to the receiver which plugged into the pins on the gimbal. It really was plug and play - i didn't open the box right away and emailed with the same...

Hi cbuk. I also plugged in the radio gear today and it works brilliantly! Very impressed with how smooth it is. The hardest part was getting the Graupner TX from German to English!! LOL I got the jitters too when tilting, but i think its way beyond how much the copter will be flown. I'd be...

Hi Quinton, Thanks for the info. It kind of works, but its not 100%. It still follows a little, but it might be ok when flying. I guess i'll find out when i test fly it. Hopefully they'll fix it completely. I did get some jitters, but it seems to have sorted itself out which is good. Shame...

Got mine yesterday too.. Just been playing with it and mine too seem to do nothing when moving the pan and tilt sliders. I don't think i have the jitters though. I was also missing two thumbscrews! I'd also check all the bolts are done up as some of mine were a little loose! What i'm trying to...