We are proud to present some of our recent work containing close range aerial imagery from all around the globe.
All shot using RED, BMPC 4K, and few other cameras on M10 and M15 & custom X8 multirotors.
To be honest i just couldn't bring myself to choose from all the footage that we shot. 4...
This is a custom foldable frame made from 2mm CF plates. Very rigid, if i hold 2 opposite arms and pu a lot of force to flex 2 others there is barely any give at all.
I have designed a similar platform before that just like this one was super lighweight and carried RED beautifully...
I have attached a short video:
You can clearly hear the motor oscilations and see the arms moving up and down(especially the front arms) and camera gimbal wobbling. This was with pich/roll 60 and yaw/vertical 70 basic gain. Attitude gains were at 55.
I have already tried:
-recalibrating...
So far i have tried changing the payload dampers from ultra soft to stiff, different IMU to CoG location settings(Z and X axis) and medium/high ESC timings.
There has been no change in behaviour, still gain related oscilations/wobble visible...
The frame without battery is 3,4kg. Batteries are...
Hi.
Here is my new multirotor setup with Wookong M autopilot and camera gimbal/payload.
For a test filght i have been using a landing gear with dummy weight payload(AUW 8kg) and it has been behaving perfectly and smooth with basic gain at 150 or even over 200(yaw and vertical at 130) without...
Hi.
I'm using stand-alone GCU H3-3D along with custom build X8 multirotor running Naza V2.
Besides getting slow tilt axis movement(using "delay" option on my Jeti DS-14 transmitter) is there any way to get a smooth ramp-up at the begining and the end of motion(like on this video...