Recent content by Racer38

Still need to upgrade the VTX to 1.3

If it does it in both GPS and Atti mode changing out the Sat antenna wont make a difference. Its something in the settings either on the Radio Transmitter or in the Naza. What transmitter are you using ?? Futaba, JR, Spektrum ???

What type of TX are you using? Everyone is looking at the aircraft, but I am curious how the radio is set up. Could it have dual rates or expo set up on the same switch you use to go from GPS to ATTI to Manual ? I have a similiar set up without the heavy lift and it works fine with the stock...

Thanks for the Help, I plugged the Naza into SBUS2 and everything is working, placed the RX in Mode A so Channel 8 is suppose to work. I assigned a switch to Channel 8 Aux5 and it shows on the TX as the switch working but its not switching the camera, so I must have other issues with the switch.

Any Futaba Experts out there ?? Here is my dilemma. I am using a 14SG on my F-550 Hex with Naza V2. I have my FPV Camera and a GoPro on a Gimbal. I want to be able to switch between cameras so I added a SmartFPV switch. Now my issue, where do I plug the switch into the RX to be able to...

So I took the plunge and bought a Zenmuse 2 axis at the new lower price. Very happy with it straight out of the box, works Great. But this is about a custom Gimbal mount setup on my F-550. I didnt want to add any big landing gear so this is what I did. I found a 2mm carbon fiber plate that is a...

Well I am glad that worked out for you, I know one one of my other gimbals I had to increase the power to the tilt motor for the extra weight on the bottom of the camera, its amazing what just a little change in weight will do .. Craig

So if you unplug the usb video cable from the camera do you still have the tilt problem ? I dont consider that jitter, I consider minute shaking of the camera as a jitter. I would try to increase the tilt motor power a little as with the extra weight of the cable it may be causing it to jump...

You will need to give us a bit more info on your set up. I have never had any jitters from mine, I did have an issue with the wandering horizon but I have that sorted out now. What is it mounted on (aircraft), are the props balanced, what are your motor power levels and your gain levels...

Thats awesome, the extended warranty was worth the price !! Now you have me wondering about the Tarot Cable, I have seen posts that people have been using it with success. I would also like to think it was just a coincidence that your lcd screen quit, as it shouldnt have anything to do with the...

The WiFi should work, it will just have the factory setup, cant remember what it is but give it a shot

Sorry to hear that John, I havent tried it on mine yet. I did get the Tarot connector and cable for the hook up. What type cable did you use? You may be able to turn on the wifi and set the camera up using the phone app, not the best solution, but it may work. Craig

I just run the GP off its internal battery, I can get 2 hrs on the GP and I have a spare battery I bring with. I just dont see the need to power it, I will be powering everything else off the flight pack so I dont want to add more to the drain.

I already have one of the iOSD Mini's waiting to be installed. FatShark has been out of stock everywhere for quite a while and I am still patiently waiting on my order to be filled. This is exactly how I plan to do it, now I just hope its not too much data to take in while trying to frame a...

Why not just add an OSD so you can look through the camera and still have an artificial Horizon and such so you know what attitude the bird is in ?