Recent content by Patar

Ok that's what I wanting to hear. A course, I wouldn't use one receiver for both quads I was going to buy two of the same receivers like you suggested. Thanks, Pat

Possiblely a DX8 or Frsky Taranis X9D in mode two. They w

Would it be possible to use one radio for two different quads? Also, if I use the same receiver on both quads would I have to just rebind the radio each I use the quads? Thanks Pat

Once again I have returned for advice. This time I'm looking for advice on my fpv build. So here's the part list: 1.TBS Discovery with the tbs core 2. Naza V2 3. Motors - I really want to know your opinion ($20-30 range) 4. ESC's - I really want to know your opinion 5. 9x5 Graupner E-Props 6...

Yes I'm getting full throttle in the naza software.

I have figured out how to use the Dx5e with the naza. I have to admit it was major pain in the butt. Ok let me get to it. The motors successful spin but I'm only getting a few inches off the ground. Im using dji motors and dji 1038 props. Should i get smaller props like 9 or 8 inch or are my...

How about a turnigy 9x or dx6i

But if I have it attitude mode on the dx5e shouldn't my motors still spin up?

I was talking about the DJI DT7 but out of the two which one is better the DT7 or DX7. Would the dx6i work because that's more in my price range. thanks pat

Any thoughts about a dt7 then?

Ok I'll try it Benjamin.

I finally figured out why I was getting a CFG error in DJI assistant it was because I had plugged the wires in wrong into the receiver (NOOB mistake :dejection:). After fixing that problem I was finally able to calibrate my tx (dx5e). Oh yea I'm not using the naza gps. With that completed I...

If I'm going to buy a new transmitter which would be the best for me?

I got the dx5e binded to the receiver. So do have to program the gaza next to get the motors to even spin? And thanks for the advice guys!

I assembled my quad and Im having trouble with binding and the main controller. Also, Im getting a Tx error while in DJI assistant. Any help will be greatly appreciated. Tnanks Specs: DJI 450 Flame wheel DJI 920 Kv motor DJI 30 OPTO Amps DJI NAZA-M w/GPS AR6200(receiver) Dx5e