Recent content by Nobody2

Wise choice! There's a reason the U.S. Military uses Futaba for their LOS applications.

Dji rx Hi Dave You are absolutely correct about binding directly. In fact that is what I did. However, I put the radio in the sbus mode to get 14 channels. (Mult2) Just so you know I'm a JR/Specktrum fan, and forced to switch to Futaba for teaching reasons. It's amazing to me how many...

No Problems in Arkansas S800 evo Rtf Futaba 8fg with SBus Zenmuse with NEX 5. & Futaba Rx DJI OSD DJI 5.8 video link Maxxamp 11000 mah lipos firmware 2.1 Have at least three hours on this bird without any major problems. Did run into the rocking problem,but had the distance from home set at...

Hi Taylor thanks for relaying that post for me. It it appears that you are good to go, in that my A2 is put together just like yours. Glad it's working! beside the A2 performance improvement I really like being able to to use and access all the functions (14) channels. Greg

Taylor Had the same problem until I updated EVERY device. GPS, OSD, F/C. Everything can be updated from "tools" section except the OSD. Restart after every item and do the OSD last. greg

Put the Cog setting back to the original setting. Balance the bird, and you may have to move batteries around or add weight in one more arms to get the proper balance. Remember the Z setting is negative going above the IMU. good luck!

Andy plug your remote shutter release into channel number 8 on the Futaba Rx. Assign a three position switch to that channel. Depending on the release and the camera you should be able to take stills and video just by using the switch. good luck