Recent content by Louis O'Dwyer

http://www.ebay.co.uk/itm/Photohigher-AV200-360-Gimbal-for-a-DJI-S800-EVO-Drone-/191501687429

Hi, I am thinking of selling my S800 EVO with Zenmuse 15 with Sony NEX7 camera. I bought it in August 2013, I don't use it at all and I can't justify keeping it as a hobby. Everything below is included. It flies really well and if you go to the website listed below there is plenty of footage...

I am selling a Photohigher AV200 360 degree Gimbal for a DJI S800 EVO. I bought the gimbal in July 2013 but soon afterwards I bought a Zenmuse 15. I paid 1270 euros, including shipping, and will sell it at half price, ie. 635 euros, including shipping. I am located in France. You can see it...

Hi Richard, I thought of doing that, but I thought it might affect the strength/integrity of the carbon plate. I then thought that I could cut strips off the old carcon fibre plates (that get replaced with the modified ones), and glue them to cover the cuts I had made, to strengthen it up , but...

Here's my solution: http://youtu.be/CMmyUbDNSc0

Hi ddikie! sorry to hijack the thread here, I see you're using a NEX7 - tell me what settings do you use on the camera, for best video and pics? Thanks! Louis

Aah, I'm using a Sony NEX7

Sure that should work fine, my problem is getting Channels 13 and 14 (DG1 and 2) to work... For the retract servo, I connected it to CH1/9 and it works fine. Make sure: the servo cable is connected the right way on the S800 landing legs. Try both ways. If you are getting a red light, you need...

How is your shutter working? How are you triggering it?

Hi Econfly, I have that setup working now on the T14SG with an R7008Sb, but I can only get channels 9-12 to work (working very well, as it happens).. 13 and 14 show up as digital channels on the Tx and I don't know how to get them to work.. I assign them to switches and in the SERVOS menu I can...

How do you balance the foldable props on an S800 EVO? Here's a video I made about how tight I think the foldable props should be, not sure if it's any help.. http://youtu.be/aIlXhZUExNw

Hi all, I'm using a Futaba T14SG with the Rx in D-mode to give me 14 channels, but I can't get the last two (13 and 14) to work. They are digital channels and I don't know how I can use them with my setup.. An ideas? I need one more channel for single operation with my Zenmuse.

Here's how I pack mine away: http://youtu.be/mW19jpU_NPY

Here's how I installed my S800 in a Peli 1610 case. I couldn't get any transmitters in there, but if I am travelling I will need a 2nd case anyway for TX, monitor, charger, tools etc. Those items can just be wrapped up well in a suitcase. At least the S800 and Zenmuse is well protected...

Just replace the connector unit on the "core" ?