Recent content by LarsNiko

Seemed to be a software error in WKM assistant. Switched from 6S to 3S and back to 6S and voila! I could type whatever I wanted. :) Never mind! It WKM assistant changed the first level protection back to 23.10V, that's why I could enter a greater valde in Line of loss...

Thank you for your detailed answer. But I have had the protection working perfectly but now when I have upgraded with a bigger camera I get a big number on line of loss. See numbers above. Full battery with 25.2v --> first warning set to 21.6v --> flight --> battery shows 23.05 = 1.45V line of...

It's the middle of the night here and I'm currently "out on a mission" and I'm gonna film a rally tomorrow so I don't have any other options right now. Just don't wanna crash into an expensive rally car tomorrow. I had about 15 min flight time with the GH2 and now with about an extra 400g I have...

Voltage problems Hi guys, I recently bought a Secraft conversion kit and fitted a GH3 on to my standard S800. No retracts, just a video transmitter other than the camera. I have two 6S 6000mAh, 25-50C batteries at about 1800g. Yesterday I reseted the voltage protection as I need to do a new...

Voltage problems Hi guys, I recently bought a Secraft conversion kit and fitted a GH3 on to my standard S800. No retracts, just a video transmitter other than the camera. I have two Turnigy Nano Tech 6S 6000mAh, 25-50C batteries at about 1800g. Yesterday I reseted the voltage protection as...

No problem, maybe my comment was a little confusing. :) I'm Swedish so english isn't my primary language. Thank you! I will have a look! Yes it is! But when you convert it and change the frame I guess some problems can occur.

What? It got everything to do with this thread? I've read more than once that when you convert Zen GH2 to GH3 with the Secraft kit the GH3 comes of center on the horizontal axis. I own the GH2 and want to convert so it's an important question to me. But if you have experience in the subject I...

But isn't there some problems with the center of the lens not being in in the horizontal center of the gimbal and therefore moves up and down while rolling?