Recent content by kraftybrett

Set your transmitter end points. Using the GUI open the RC CONTROLS tab look at the live tx data, then use your tx sub trim to set the throttle low at 998 and all the mid sticks at 1500. Then using the tx end points adjustment make the throttle high point 2000, yaw left 1000, yaw right 2000...

Hi my friend. Your problem for sure is your transmitter end points. Using the GUI open the RC CONTROLS tab look at the live tx data, then use your tx sub trim to set the throttle low at 998 and all the mid sticks at 1500. Then using the tx end points adjustment make the throttle high point...

Hi there. Regarding you control sensitivity, Using the GUI or the android App just increase the RC EXPO until your happy with sensitivity. HAPPY TUNING

You need to put a test inline with the battery and esc. Just connect the - batt lead to the - esc lead as normal set you meter to amps and conne the + meter lead to the + batt and the - meter lead to the + esc, fire everything up and check the current draw. If its high start disconnecting things...

Hi there. Your in built battery will either be li ion or li poly but will run the a voltage regulator like a BEC and some kind of voltage divider with a reference voltage set to the min voltage needed to run the screen etc. So the battery voltage wont actually get to zero. As for storage its...

This is a great community of mutirotor mad people from all walks of life. Loads of great info already available here and I hope to add some more. My main expertise is everything multiwii and custom electronics building and setups. I look forward to speaking to you all...