Recent content by kostasbmw

i use this file and then i customized it to my needs but the basics are there http://rcsettings.com/index.php/viewdownload/6-multirotors/216-naza-m-lite-v2-sbus-config

yes you really need these extra 2 channels e.g. retracts ,,,lights maybe

sorry i m late x2 to sbus correct forget the traditional for now try to connect directly to free chanel 7 to a 2 pos switch

i have the same with an X8R receiver.....i have no pitch control but i dont really mind i have connected to the receiver directly on channel 8 a switch control and works ok i guess if you connected directly it will work

ok which way have you done your connection between naza and x8r??? traditional or sbus??

yes you have to set 3 possition in the same chanel so when the switch is towards you manual then middle atti and the other gps and when you set the 3 postions you calibrate each one as i told you and then in the same chanel you make a 4th position, choose another switch(i use the SE switch for...

your offset should be 169-170 for gps atti offset 4 to 5 manual -160 and failsafe around -65 dont touch weight leave it to 100

i finished the failsafe thing and i noticed that when i test failsafe and turn the tx off the throttle goes to 55% but i see in dji asistant the mode to attitude.Then i tried again and i see the failsafe highlighted.Am i doing something wrong or the SE switch was in the wrong position?

fantastic job Gringers i ll tell you the new as soon i finish managing cable in my TBS i did some testing for the wiring and soldering and i had some issues like some people could nt start their motors. what i did is disconnect everything some servos need to be firmly inserted in position and...