Recent content by kjella

Hello i cant get my gain up and i wounder if the hoverfly is like the imu on dji it have to be as close to cg as possible to get the best out off it i have my proboard on topp off the cinestar 8 frame and my batt on topp off it,under the frame the movi m5 is hanging ,so maybe if i lower the...

hello can i ask about somthing here i have my okto setup with turnigy plush 60 amp and tiger u5 motor,so far the octo i flying well,but i am not sure if the plush esc is good for tiger u5 motor?anyone that fly with it? if not i want to change to tiger 40amp esc,so can i use the tiger 40 amp...

ok know it is working with the 3 switch positions i try the gps hold today and i think it need some tweaking? is there something to do with the gps gain or something like that??,or is it just off-on,and nothing to adjuse? the octo hvae the bow toilet effeckt,!!it goes round and round like the...

ofcourse i know that ,but it is a good start point to know how other is flying too,you know:-)

thanks i will try this and i will report how the gps work i also have the ublock gps ,but i wil test the orginal first

Hello i have no mounted my hoverflygps and done all the calibrations and everything looks good know i have to assigne the transmitter and a 3 way switch,i fly the jr Zero 11x do i have to go move the cables from my proboard to the gps board or am i missins somthing here?? i lookt in the manual...

Hello bartman thanks for all info about the ublock gps i have now get my gps from 3d robotick and i have flash the pro and gps board with 4.8 ublock firmware now i am looking at the wires mod i dont understand it is it possible for you to take a pictures of your wiering so i can se what cables...

hello do you fly with hoverfly gps board to?

hello is it a 8channel radio ok to fly the okto with hoverfly?is it enougth channels? jr xg 8:-)

thanks ,do you have any tips and maybe some numbers:-) i fly with jr 11x zero

I have now setup my octo and i flyes great ,but i think the throttle is to sensitiv around hoverpoint(center stick) and i wounder if there are something to do with that? Can i do something with my throttlecurve?? any suggestions thanks

thats not good,why cant they fix a proper osd thats work with 1-6 s lipo and higther??

thanks it is working now. i looked at the voltage on the osd it said 4 cell lipo 16,8 volt but i want it to be like a 6s lipo and i want to se when i have to land the octo at 21,9 volt ,what to do??

Hello i have just build me a new octo for my company skydrone.no and here is my setup FRAME: CINESTAR 8 WITH 2 BOTTOMPLATE TO STIFFEN THE FRAME MOTOR: U5 TIGER ESC : TURNIGY PLUSH 60 AMP (i wa told this was the best choice for hoverflypro). Props : tiger 14" carbon GIMBLE:FREEFLY MOVI M5...

now i have order the gps from 3d i hope this work great