Recent content by Icke84

Hello, any news how they fly and feel compared to the tmotor originals? thanks Marcus

hi andre, it isn't your fault :) he just not wrote the 0. before the 20. so the i vaue is always 0.something. in this case 0.20 als the oher values are correct. so try it again with 0.20 and you will see it will work. regards Marcus

maybe someone can help me: i have some strange things going on. i build a 3 axis gimbal with 2 boards. on the pitch/roll board i used the 1.2b firmware and everything was setup good. on the yaw board i flashed the new v2 firmware because of the z axis function. now i want to use the v2...

anyone have some "standart" settings for the nex5 which i can use a a starting point with the new alexmos v2 software?

i would say yes. because i build abigger handgimbal for my fs700 and it only works with 4s.

Hi, i didn't got the sensor error solved. so i used another alexmosboard with sensor i got yesterday. it's a newer version i think, because it looks not like the one i had from gothelirc. So now the problem. i flashed the firmware, calibrated the sensor in all positions and then setup the pid...

Hi, I checked the wires but only with m eyes. Don't have something here for testing. And it also doesn't work with a battery. Still only the red light is on. Any other ideas? Gesendet von meinem HTC One mit Tapatalk 2

Hi, got a problem. Controller worked but i wanted to change some setting and connected the usb adapter plate to the controller board while it was powered. Then startet the gui and got a sensor not connected error. Even reflashig didn't help. On 1.3 i got the green light flashing but on 1.2 the...

i used the hoverfly gimbal and i upgraded to a 360° mount. everything is mounted correct and if i tun on the yaw servo it also moves wenn i turn the gimbal. but it moves to much, like the scaling factor is too high. but i only can set the center point of the servo. so when i move the gimbal...

Hi Guys, 3 axis is not out yet so i tried something with 2 boards + 2 mpus. first board controlls the tilt and roll, second board the yaw. for that i turned the mpu sideways and mounted it on the right arm of the gimbal roll axis. so x is now pointing up and act like z. looks like this ould...

nobody reads the manual? Menu button If you have connected menu button, you can get quick access to number of functions: • Single-press — runs accelerometer calibration (like CALIB_ACC button in GUI) • Double-press — temporarily switching input from receiver's PITCH axis to ROLL axis. This is...

I was there but without my gothelirc gimbal. Tried out the movi. Nice setup but price is to high. I will build one handheld rig by myself :-) A friend of mine build a 360° servo mount on my gimbal so i now have 3 axis. Cant wait for the 3 axis alexmos controller. Greetings Marcus from germany...

So as i said, here is my first test video with the gothelirc brushless gimbal. It's not perfect i know, but i just got it some hours ago and didn't even plug it on the pc. just balanced it roughly and put it on my prototype hexa and go out for one testflight. I have not much space at my...

For the most fluid settings film with 60p and edit/render out with 60p. anther way would be to film with 60p and render out in 30p, will also look good, but not as good as 60p. and bitrate should not be under 6mbit/s. And always render out in fullHD, even when most vimeo videos are displayed in...

It's out of stock. I guess he reached the limit with the preorder and had to reorder new parts. Hope he will send out the first gimbals, can't wait :)