Recent content by Gsimpson2g

Lol that coin toss rundown had me rolling. Thanks!

http://copter.ardupilot.com/wiki/stabilize-mode/ ANGLE_MAX setting under the tuning section on this page. You can change that value to decrease the maximum allowed angle for roll and pitch.

That depends on the thickness of the arms. Just something you have to watch for. If it looks like too much of the screw is sticking out the other side of the arm, just find some shorter ones, or use some spacers between the motor and the arm. That's how I usually handle it. As far as the max...

I'm not quite sure what is going on with AeroQuad, I haven't really kept up with it. I used the DIY style kit, where you solder the sensors to a board that then stacks onto the Arduino Mega. It flew great, but I quickly decided I wanted to play around with GPS stuff, and the APM 2.6 was the best...

Hey guys, and gals! New to the forum, saw the radio show video and decided to join. I live in Maynardville, TN, located about 30 minutes north of Knoxville. I have been building and flying multirotors for 2 years now, with some plane flying too. I started off with a simple 450 sized quad, using...

I love PRODRENALIN!