Recent content by fr3style

This would be my first offshore job! Been trying to get offshore for two years! Hope we get the contract! They have briefed me on the rules and permit system! My only worried realy are the signaling! If 2.4ghz and 5.8ghz will be fine! I wont be flying so far so distance wise i feel it will be...

Our company has been asked to do some aerial footage in two places that I have not done before. Safety First is my number one rule!!! 1st Job. The Navy in the town where I live have asked for aerial shots of their boats docked in the port. The production company who has been hired to run the...

So here is my Setup Y6 Rusty Frame Got the 6 esc soldered onto a power brick that I stupidly covered with that instant plastic glue and I put the esc so neat into the body that taking this apart will suck ( yes yuri when you read this you may post told you so ) Naza V2 I want to get a 12V...

got it!

Hi guys! I bought the Vector DD and build quality is nice! Could you please post your PID values here so we can copy that into the gui sw and then tweak from there? Also what is the best video out cable for the gopro so i can fpv with it? The one i bought from you guys wont fit anymore :(...

Hi nnevonyjr We have some machines in Brazil that we use. shoot me a email sueco.brazil@gmail.com

So using the 11x4.7 i get 8 to 9 minutes flight times. I have to admit i need to fine tune Naza a bit and my buddy says doing that i will get more flight time before red light comes on. Cause yesterday when i charged the 5000mah packs i only manged to prop in 3000 when it said full. So im...

Yeah Yuri thanks.. Im going to buy some 12x3.8 found a local guy in Rio De Janeiro that has some. Not so much more then usa so im happy! But 12x3.8 is what i need right? I have 11x4,7 now Wonder if changing them around a bit will give me some benefits. Fast flying is not my priority now...

So had a little misshap today. After a smooth flight in wind gusts. Testing out my FPV equipment that worked amazing with the brushless gimbal. Landed and did not turn of motors yet as i wanted to do another takeoff. I left the button for less cyclic on and the thing just went sideways on me and...

What frame are you using and is it DJI NAZA?

What batteries and how much flying time. My Setup is Rusty UAP2 11 inch props allround AVROTOS 2x 4S NanoTech Turnigy 5000MAH NAZA V2 I get 8 minutes and 30Secs woul love to get 12+ minutes

Tried my Y6 Rusty with AVROTO using 11 inch blades. With two 5000mah Turnigy Nano-Techs i only get 8:30 minute flight until the red light on the naza starts to blink!!! What can I do to get 12 minute flight times. This is using a Brushless gimbal for a gopro. Imagine when i try to lift a nex5 i...

So I swapped my ****ty Servo based Gimbal for a kick *** AlexMos Brushless gimbal and all was awesome!!! I then tried to hook up the cable from the naza to the RC in port so I Could Pitch form the TX. But I thing I swapped the direction of the cable and after that my Naza is doing the following...

My Y6 is now airborn and flying pretty decent! Need to just get some battery plate holders and make the gps face the right angle! What yuribsaid about aligibg my motors on the arms solved my ywa issue! Now to see about propps! I have 11 inch all round! Some people aay use small underneath

So my Y6 is now finally airborne! I have just got some of the YAW fixed. Thank you Irisaerial. But i need some advice what is the best absolute best way to allign the motors so that the are perfectly horizontal. Im using a Rusty Y6 UAP2 with vibration dampening motor mounts. My rid felw...