Recent content by dynexhobby

Hey guys we're still around :) In fact we just released a new balancer called "Impulse" which is a plug and play device. Check it out!

Here is a handy tip for when designing multirotors.... http://dynexhobby.com/dynexhobby_022.htm enjoy!

Done. Looking forward to feedback from Vortex users. Thanks.

Yep no problem, just sent PM with key.

Hi guys, please note there is a new software upgrade available. The latest version now includes a measurement tool which can be used independent of the Scope software. It is only available to customers who purchase the Vortex. You can download it at the link below...

The trial & final weight for a propeller should be close to the tips. What ever radial distance you use, you must maintain throught the balance.

Hi Carapau, First off congratulations on your effort and sounds like you are well on your way. You are correct about balancing; there is a lot to learn. However, it’s just like everything else new in RC, once you get it, it’s there with you forever. Remember the first computer radios that came...

Hi guys, please note there is a new software upgrade available. The latest version now includes a measurement tool which can be used independent of the Scope software. It is only available to customers who purchase the Vortex. You can download it at the link below...

Never tried it on a Mac. However if you can run in the Windows environment I don't see a problem. regards Mark

Hi Scott, We are currently taking orders. Next production run will start shortly. regards Mark.

There is a learning curve with dynamic balancing. Best bet is to read the manual first then watch the videos on our YouTube channel. The manual outlines the basic theory and provides step by step methods for carrying out balancing. I'm always on the forums to help answer questions. We went...

This thread is for user support. Thanks.

I have created a video to answer your questions. https://www.youtube.com/watch?v=fS5n3Qoue1c You might also want to check out these two videos as well, https://www.youtube.com/watch?v=Onn0NhW7BOU https://www.youtube.com/watch?v=AjZ23L6aUQ4 Basically, use the peaks in the frequency tab to...

Ahhh...it makes sense to me now. The problem is with the setup. Having the sensor way out changes the dynamics of your test rig. With the current setup, you are getting secondary harmonics due to the flexing of the beam/motor/motor mount configuration. See attached pdf document. Basically you...

Hi SRbell, 1. Negative value is normal. It just means you measure in the opposite direction from zero. So if 0 to 360 is counter clockwise then you measure 112 degrees clockwise. 2. The 4 point warning message is telling you that your vibration during the trial unbalance at 0,120 and 240...