Recent content by DaveM

Is your TX in ACRO mode or HELI ? Dave

Hi Yuri, I would think the ROK mentioned would carry about 1.5kg (3.3lb) A quick search showed: AV130 410g (with servos) Nex5n with 16mm pancake lens approx 450g There are a few people using a Nex5 or Nex5n, might be worth a read...

Hi Yuri, I have never been a great lover of soft kites for KAP, they have a habit of collapsing just at the wrong moment, and a very fast decent of your gear. As you say, depending on design, the angle of attack, and position in the sky can be very low. A Rokkaku is much better kite for KAP...

For anyone interested in having a go, and wanting equipment, I have posted a couple of links. I used to have a Brooxes rig, Canon camera with CHDK hack, downlink, and a variety of kites for different conditions. http://www.brooxes.com http://www.kapshop.com Dave

Many thanks Dave

I done KAP for a few years before moving to Multirotor I was recently at a kite festival in Portsmouth UK, and there would have been no chance of putting a multirotor up with all the kites and crowds of people underneath if you did not fancy a visit from the local authorities. Put up a KAP...

Cheers meme, I forgot to ask, are you running on 4s and a WKM ? Dave

Hi meme, My F550 is a similar weight, currently 3.2kg and I was looking to upgrade the motors. What size props are you using with the Tiger 900kv motors ? I already have 4 spare Tiger 800kv motors I could try with buying another 2, or purchase 6 of the 2216 900kv versions. Cannot seem to...

Hi Terry, Firmware 5.08 used Assistant software 1.26 Download from here http://www.traderc.com/djiwkm/DJI%20WKM/ Dave

I would be interested to know as well, not even got mine out of the packet yet ! Dave

Looking good :) Have you managed to get a HDMI cable to fit, or have you had to modify it ? Dave

Thanks Kloner, I will check with the guy that has his Frsky working, was it V1.1 on the board and on the OSD. Not sure if I could upgrade the firmware or not, would need to ask Trappy I suppose. Dave

I think I may have got mixed up with my version of core :shame: The core PCB says V1.1 but the when it boots up the graphics show in top right corner V1.0 in OSD. Do all the OSD displays show V1.0 ? I thought this was the core version No Dave

Cheers Kloner, Thanks for the explanation I have seen this once on mine when I was trying to set up the RSSI from a FRSky S-Bus receiver, never did get it working properly. Are all your Core versions V1.0 ? as another person has got his going with the FRSky receiver, but he has V1.1, not...

Hi Kloner, Can I ask, what is the 2nd voltage readout on your TBS core ? I only have the furthest top left one displayed on mine, (battery voltage) ! Dave