The pelicase is only for my other camera kit so won't fit the s800.
I could get a case and box it all up and send if you wanted to cover the cost of the case and postage?
Let me know and I'll work out a cost
Looking to shift my S800 Evo. Its done about 6 months work and then was left as a back up machine. Its a good as new and never been crashed.
Whats included:
S800 Evo fully built and ready to fly
Z15 Zenmuse GH3 Gimbal
Panasonic GH3 Body
Wookong FC
Multiplex Royal Pro 9 Radio (some pixels out...
Hi,
I'm looking for help to solve my DJI S900 from shaking/ vibrating.
History - running with a Z15 GH4 on it for 18months with no problems. I've taken that off and put on a 3rd party gimbal using an adapter on the rails. All up weight is 7.8kg.
Problem is that the frame shakes about and when...
After some help please...
Just fitted a new gimbal to my S900 and its shaking in flight and when the gear is raised it seems to get worse.
Previously had a Z15 on it and is smooth as silk. I adjusted the IMU and GPS Z axis which helped a little but not enough.
The COG is now lower and i was...
Hi,
I've just fitted a brushless gimbal to my S900 and when in flight the whole aircraft vibrates and jumps up and down and when you raise the gear it gets worse.
The gimbal is mounted using a plate which is mounted in the same way a Zenmuse is. The gimbal does sit lower than a zenmuse too...
Hi,
I was wondering if you can help me?
I've attached my besteady under my S900 using a plate i made to screw in like the zenmuse does. Problem is that the copter is vibrating and gets worse when i raise the gear.
How did you attached yours to the frame?
Thanks
Sorry to bring up and old thread but.........
I'm also looking for some ideas on this too.
Normally i get a very comfortable 7-8 mins with about 25% left in the packs on my S800 (landing at 21.6ish). The other day the iOSD was reporting 21.6 after about 4 mins of flight. When i put a battery...
Out of interest what monitors are people using?
I've just fired up my GH3 Zen and got a white screen for about 3/4 seconds before getting a image which has never happened in the year or so i've been using it!
I'm using Black Pearl monitors.
Well it was a total PITA for me today. Arrived onsite for a job and nothing but a white screen. Tried rebooting 20 or so times and nothing. Lucky the job was just stills at various heights and i was able to yaw to the right directions and just fire the shutter a few times to get the shots. But...
I have the ground station for the iPad and it will not connect to my A2 flight controller. Ive tried all i can think of including updating the air and ground side. When you open the iPad app it can't see a flight controller.
The odd thing is if i plug it into my WKM it sees it straight away...
Can someone confirm for me what power is given out from the iOSD is using a 6 cell battery?
I have a video transmitter which will only take up to 17v and don't want to blow it up!
Hoping its 12v
Thanks