Recent content by brinnus

I have re-worked a different configuration for the 3 position switching and it arms and fires up ok. I now need to trim it as the low throttle position is too high but cuts the motors if set any lower and a reboot is needed. The other issue is that when it boots, because it goes immediately into...

Thanks a lot guys for your help and patience, I am really greatful. I have made some progress in so far as I can now arm the motors through Naza. The major problem was that I followed a video on youtube and if it worked for that guy it certainly didn't work for me. I have changed the connections...

Ok, I did exactly what you suggested and the motors still fail to arm. The next thing I suppose is to check the firmware version, only problem is that it takes 3 to 6 weeks for HK orders to arrive. As I said earlier I could not find a pc lead for the 9x on their web site, any suggestions where I...

Sorry I should have mentioned that, both at the start of installing the motors they all armed and calibrated ok when connected direct to the Rx. As soon as I started to run into problems I checked this and calibrated again. I have made a crude video and uploaded it to youtube...

Thanks for your reply, I am sure it has the latest firmware because I have only recently bought it, had to wait for new stocks to arrive at Hobbyking. I will make and post a video as you suggest.

Can anyone confirm that the Turnigy 25A ESC (part code TY-P1) is NOT compatable with the Naza MC. Neither Hobbyking nor DJI know. My problem is that the motors won't arm when connected through Naza MC. If anybody knows that they ARE compatable then I ask for your help in configuring my Turnigy...

Not totally new to RC, but need a lot of help with modern day hardware. :nevreness:.

Problem. All motors arm and are are calibrated direct from the Rx, but won't arm when connected to Naza MC. I am using a Turnigy 9x latest release from Hobbyking. I list below my step by step configuration settings for the transmitter. System Typ sel. Heli Heli 1 Mode. PPM...