Recent content by akromatic

end points are numerical values that define the "borders/limits/travel limits" within which a switch or a knob on a Tx can move, not physically but virtually. that means that you can adjust the "borders/limits" of every position on your switch in your transmitter so that each mode is highlighted...

Ed: I will definitely get it when dji releases the Android version, I'm not exactly a fan of Apple products.. (no pun intended) Propilot:do you run the 3.14 firmware on the Naza? I think it is somewhat better than 3.12 when it comes to triggering the hibernation mode.. I got the feeling that...

Thanks guys, I think I will stay away from the wifi since it may interfere with the Naza and GPS..

first of all you have to assign a 3-position switch on you transmitter for these modes so that you can choose the desired mode with the switch.. then open the naza assistant and by adjusting the end points of that switch in your transmitter you will see that on the flightmode bar in the...

Weird.. Can't get the hero 3 wifi remote to connect to the camera when it's mounted in the h3-2d.. Tried numerous times..Anybody else have this weird problem?

Yeah, that's what I'm doing now, slow flat turns to keep it out of hibernation mode, works pretty good but oh how nice it would be to bank and film..

I got my gimbal 2 weeks ago and it was truly long awaited. I immidiately upgraded the fw to 1.04 because I've read about motors overheating with the old firmware. I have flown with it 10 times on my f550. The gimbal performs flawlessly in forward flight and ascends/descends but as soon as I do...

It is not an esc issue I am sure because I have hovered with this setup many times at even higher altitude and yawed..

Scary... I crashed yesterday too man.. Just as you the frame was completely intact, only two legs were bent, the Vulcanframe is tough as hell... Just like you all my props were trashed and the GPS antenna fell off but otherwise everything works, even the av200 gimbal works perfectly after the...

Thanks for the input. Actually I almost always fly in atti-mode without GPS but now when I put on the gimbal I fly in gps-atti mode. I have done some manual flying too. I simply panicked and should first have switched into atti-mode but went for failsafe instead...

Here comes the crash video: http://youtu.be/L38VNfbmYI0 2:30 into the video things suddenly start to go wrong..

Thank you guys for excellent input and ideas, I am starting to think it might be a temperature problem as several of you said. It was +5 degrees celcius at ground level when I flew and might have been colder 50 meters up. My auw was 4.9kgs so I don't know if weight has something to do with the...

I was going to do some night filming with my Vulcan 900 mm hexacopter today and I have the Naza with GPS on it. Tiger Motors 2814-10 with Xoar 12x5 props and 40 amp Dragonfly esc:s. Powered by two Zippy flightmax 5800mAh 4s and a av200 gimbal underneath the frame with a nex-5n on it.. So what...

and I thought mine was heavy at 6kg.. hahaha... way to go man!

agree, excellent lens that is sharp out to the edges at an amazing price.. reasonable weight too..