Hi Chris,
Your build came out awesome. It was a pleasure working with you!
We are now stocking KDE Direct Multirotor motors: http://www.addictiverc.com/store/agora.cgi?product=KDE_Direct_Products
I am building a Sky Hero Spyder 850mm with KDE motors for myself as well.
Cheers, John W.
T-Motor CF 15 x 5.5 Props tested on T-Motor MN4014 Motors
We had a chance Saturday to test some of the new T-Motor CF 15 x 5.5 Props on our new Vulcan UAV 900mm Quad Frame.
We are very pleased with the smooth results!
Our Quad Has T-Motor MN4014 Motors and they love these props.
They behave...
First Impression of T-Motor 11 x 4.5 CF Props
I just put in a short 8min flight with the new T-Motor 11 x 4.5 Carbon Fiber Props.
First impression is very good.
They Track Dead-On and have zero vibrations (I did balance the props).
I am comparing them with the Graupner 11 x 5's that were on...
Agreed.
I have only had two usable Brands of CF Multirotor Props.
We are using them for their light weight and efficiency.
We are building Drones for the Commercial Industry that require long flight times.
Otherwise We use Xoar or Graupner E-Props.
These T-Motor Props look totally different from...
I am not going to argue with you.
With every machine we have built to Date using the WKM it starts out with the motors ringing (no matter what prop material)
Then once fully tuned the motor ringing is gone.
Has to do with gain settings and the WKM sending signals to the ESC's.
By the way these...
The ringing sound is not related to CF props. It's when your WKM isn't properly tuned.
I can hear the Motor ringing sound with Plastic,plastic/glass fiber, and wooden props as well.
I can hear the same ringing sound with Xoar Wooden Props before WKM tuning.
-John W.
I just balanced the 11 x 4.5 T-Motor CF props for our Prototype Police Machine and they were not too far off balance.
Tracking was dead on. And Tracking was the big issue with other CF props.
So +1 for the new T-Motor CF Multi-rotor props.
Too bad we have a storm here in Tucson and I can't test...
New T-Motor CF Multi-Rotor Props in stock at addictiveRC/RcHobbyHelicopter
We just recieved some of the new T-Motor CF Multirotor props.
We will be testing the 15 x 5.5 and 11 x 4.5 this weekend.
They look pretty sweet.
Cheers, John W.
AddictiveRC, LLC
We now have the DJI Phantom RTF's in stock and ready to ship.
Link: http://www.addictiverc.com/store/agora.cgi?product=DJI_Phantom_RTF_Quadcopter
Any Questions Email me at: support@addictiverc.com
Cheers, John W.
AddictiveRC, LLC
Yes AddictiveRC Handeled all the Production and CF Sheets For the Karbonic Line.
I worked with David on the Designs as well.
-John W.
Owner, AddictiveRC, LLC
AddictiveRC is the Manufacturer and we currently are not Producing the Kabonic Frames.
So the answer to your question naterpin is no one is making them currently.
I fly my Karbonic frames with 3S 1,300mah lipo batteries.
Cheers, John W.
AddictiveRC, LLC
New RcTigerMotor CF Props at AddictiveRC
We will be testing all the new RCTigerMotor CF Props this month.
I have all their sizes on order.
they look well made but we will have to see if they perform well.
Now up on the website: http://www.addictiverc.com/store/agora.cgi?product=Multirotor_Props...