Hi all. I have a hex with WKM, AV130 with 360 pan kit, and two Devo 10 radios - one for flying, one for video.
My question is if there is a way to make it so that the AV130 only turns a finite amount. Right now it is set up on the rudder control and if I give it rudder right for example, it will turn clockwise until it pulls all the cords out. I have also tried setting up the camera pan to the Aux 4 knob and it still doesn't have an endpoint.
The tilt on the camera does have an endpoint - and I use aux 5 to control that.
Ultimately I would like the AV130 to stop turning about 120 degrees left or right of center.
I have tried reducing the travel adjust in the Devo 10 settings - but this only slows the turning - doesn't actually set an endpoint.
Any help would be much appreciated.
Best,
Tom
My question is if there is a way to make it so that the AV130 only turns a finite amount. Right now it is set up on the rudder control and if I give it rudder right for example, it will turn clockwise until it pulls all the cords out. I have also tried setting up the camera pan to the Aux 4 knob and it still doesn't have an endpoint.
The tilt on the camera does have an endpoint - and I use aux 5 to control that.
Ultimately I would like the AV130 to stop turning about 120 degrees left or right of center.
I have tried reducing the travel adjust in the Devo 10 settings - but this only slows the turning - doesn't actually set an endpoint.
Any help would be much appreciated.
Best,
Tom